CLI Guide
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System CLI Guide
- Contents
- Using the CLI
- Categorical list of commands
- Alphabetical list of commands
- abort copy
- abort replication
- abort scrub
- abort verify
- add disk-group
- add host-group-members
- add host-members
- add ipv6-address
- add spares
- add storage
- add volume-group-members
- check firmware-upgrade-health
- check support-assist
- clear cache
- clear disk-metadata
- clear dns-parameters
- clear events
- clear expander-status
- clear fde-keys
- clear fenced-data
- clear replication-queue
- clear support-assist-proxy
- copy volume
- create certificate
- create chap-record
- create host
- create host-group
- create peer-connection
- create replication-set
- create schedule
- create snapshots
- create task
- create user
- create vdisk
- create volume
- create volume-group
- create volume-set
- delete all-snapshots
- delete chap-records
- delete host-groups
- delete hosts
- delete initiator-nickname
- delete peer-connection
- delete pools
- delete remote-system
- delete replication-set
- delete schedule
- delete snapshot
- delete task
- delete user
- delete vdisks
- delete volume-groups
- delete volumes
- dequarantine
- exit
- expand disk-group
- expand vdisk
- expand volume
- fail
- help
- map volume
- meta
- ping
- query peer-connection
- recover replication-set
- release volume
- remove disk-groups
- remove host-group-members
- remove host-members
- remove ipv6-address
- remove spares
- remove volume-group-members
- replicate
- rescan
- reset all-statistics
- reset controller-statistics
- reset disk-error-statistics
- reset disk-group-statistics
- reset disk-statistics
- reset dns-management-hostname
- reset host-link
- reset host-port-statistics
- reset pool-statistics
- reset smis-configuration
- reset snapshot
- reset vdisk-statistics
- reset volume-statistics
- restart mc
- restart sc
- restore defaults
- resume replication-set
- rollback volume
- scrub disk-groups
- scrub vdisk
- scrub volume
- send support-assist-logs
- set advanced-settings
- set chap-record
- set cli-parameters
- set cloud-iq
- set controller-date
- set debug-log-parameters
- set disk
- set disk-group
- set disk-parameters
- set dns-management-hostname
- set dns-parameters
- set email-parameters
- set enclosure
- set expander-fault-isolation
- set expander-phy
- set fde-import-key
- set fde-lock-key
- set fde-state
- set host
- set host-group
- set host-parameters
- set host-port-mode
- set initiator
- set ipv6-network-parameters
- set iscsi-parameters
- set led
- set network-parameters
- set ntp-parameters
- set password
- set peer-connection
- set pool
- set prompt
- set protocols
- set replication-set
- set schedule
- set snapshot-space
- set snmp-parameters
- set support-assist
- set support-assist-info
- set support-assist-proxy
- set syslog-parameters
- set system
- set task
- set user
- set vdisk
- set volume
- set volume-cache-parameters
- set volume-group
- show advanced-settings
- show cache-parameters
- show certificate
- show chap-records
- show cli-parameters
- show cloud-iq
- show configuration
- show controller-date
- show controllers
- show controller-statistics
- show debug-log-parameters
- show disk-groups
- show disk-group-statistics
- show disk-parameters
- show disks
- show disk-statistics
- show dns-management-hostname
- show dns-parameters
- show email-parameters
- show enclosures
- show events
- show expander-status
- show fan-modules
- show fans
- show fde-state
- show fenced-data
- show frus
- show host-groups
- show host-phy-statistics
- show host-port statistics
- show initiators
- show inquiry
- show ipv6-addresses
- show ipv6-network-parameters
- show iscsi-parameters
- show license
- show maps
- show network-parameters
- show ntp-status
- show peer-connections
- show pools
- show pool-statistics
- show ports
- show power-supplies
- show protocols
- show provisioning
- show redundancy-mode
- show refresh-counters
- show remote-systems
- show replication-sets
- show replication-snapshot-history
- show sas-link-health
- show schedules
- show sensor-status
- show service-tag-info
- show sessions
- show shutdown-status
- show snapshot-space
- show snapshots
- show snmp-parameters
- show support-assist
- show syslog-parameters
- show system
- show system-parameters
- show tasks
- show tiers
- show tier-statistics
- show unwritable-cache
- show users
- show vdisks
- show vdisk-statistics
- show versions
- show volume-copies
- show volume-groups
- show volume-names
- show volume-reservations
- show volume-statistics
- show volumes
- shutdown
- suspend replication-set
- test
- trust
- unfail controller
- unmap volume
- verify disk-groups
- verify links
- verify vdisk
- API basetype properties
- adapt-expand-preview
- advanced-settings-table
- cache-parameter
- cache-settings
- certificate-status
- chap-records
- cli-parameters
- cloud-iq
- code-load-readiness
- code-load-readiness-reasons
- communication-ports
- compact-flash
- contact-information
- controller-cache-parameters
- controllers
- controller-statistics
- copy-volumes
- cs-replicate-tasks
- cs-replication
- cs-replication-set
- current-replication-snapshots
- debug-log-parameters
- disk-groups
- disk-groups-preview
- disk-group-statistics
- disk-group-statistics-paged
- disk-hist-statistics
- disk-statistics
- dns-parameters
- drawers
- drive-parameters
- drive-summary
- drives
- email-parameters
- enclosure-fru
- enclosure-list
- enclosures
- events
- eventsLogs
- expander-ports
- expander-versions
- expanders
- fan
- fan-module-versions
- fan-modules
- fc-port
- fde-state
- fenced-data
- fru-versions
- host
- host-group
- host-group-view
- host-port-statistics
- host-view-mappings
- initiator
- initiator-view
- inquiry
- io-modules
- iom-versions
- ipv6-network-parameters
- iscsi-parameters
- iscsi-port
- license
- local-ports
- local-ports-detail
- log-header-table
- mgmt-hostnames
- midplane-versions
- network-parameters
- ntp-status
- peer-connection-info
- peer-connections
- peer-controllers
- peer-ports
- pool-hist-statistics
- pool-statistics
- pool-summary
- pools
- port
- power-supplies
- product-info
- provisioning
- proxy-information
- psu-versions
- readcache-hist-statistics
- redundancy
- refresh-counters
- remote-ports
- remote-ports-detail
- remote-system
- replication-snapshot-history
- reset-snapshot-tasks
- resettable-statistics
- sas-host-phy-statistics
- sas-port
- sas-status-controller-a
- sas-status-drawer
- schedules
- security-communications-protocols
- sensors
- service-tag-info
- sessions
- show-other-MC-status
- shutdown-status
- sideplanes
- snap-space
- snapshots
- snapshot-with-retention-tasks
- snap-tasks
- snmp-parameters
- spares-preview
- status
- storage-preview
- support-assist
- syslog-parameters
- system
- system-parameters-table
- tasks
- tier-hist-statistics
- tier-statistics
- tier-summary
- tiers
- time-settings-table
- unhealthy-component
- unused-disks-preview
- unwritable-cache
- users
- vdisk-hist-statistics
- vdisk-statistics
- versions
- virtual-disk-summary
- virtual-disks
- volume-groups
- volume-group-view
- volume-group-view-mappings
- volume-names
- volume-reservations
- volumes
- volume-statistics
- volume-view
- volume-view-mappings
- Settings changed by restore defaults
The IDs of the disks to add. For disk syntax, see Command syntax on page 17.
prompt yes|no
Optional. For scripting, this specifies an automatic reply to confirmation prompts:
● yes: Allow the command to proceed.
● no: Cancel the command
If this parameter is omitted, you must manually reply to prompts.
disk-group
The name or serial number of the disk group to expand. A name that includes a space must be
enclosed in double quotes.
Examples Expand disk group DG1 to include disk 1.11.
# expand disk-group disks 1.11 DG1
Expand a RAID-10 disk group named R10 to include an additional mirror pair.
# expand disk-group disks 2.9-10 R10
Expand a RAID-50 linear disk group named R50, which has four 3-disk subgroups, to include an
additional subgroup.
# expand disk-group disks 2.1-2,2.5 R50
Add 10 disks to ADAPT disk group Data3.
# expand disk-group disks 1.1-10 Data3
See also
show disk-groups on page 178
show disks on page 184
show vdisks on page 259
expand vdisk
Description
Adds disks to a linear disk group to expand its storage capacity.
The new disks must be the same type as disks already in the disk group. The disks need not have
consistent capacity; ADAPT will use whatever space is available.
NOTE: If you upgraded from an earlier release that did not distinguish between enterprise and
midline SAS disks, you might have disk groups that contain both types of disks. For those groups,
you can designate either or both types of disks for expansion. If—through replacement of spares
or failed disks—the disk group is changed to contain only one type of disk, you will only be able to
add disks of that type to the disk group.
NOTE: A disk group can contain a mix of 512-byte native sector size (512n) disks and 512-byte
emulated sector size (512e) disks. For consistent and predictable performance, do not mix disks
of different sector size types (512n, 512e).
The expansion capability for each supported RAID level is:
RAID level Expansion capability Maximum disks
NRAID Cannot expand. 1
0, 3, 5, 6 Can add 1–4 disks at a time. 16
1 Cannot expand. 2
10 Can add 2 or 4 disks at a time (linear storage). 16
50
Can expand the disk group one RAID-5 subgroup
at a time. The added RAID-5 subgroup must
32
Alphabetical list of commands 81