Install Guide
Table Of Contents
- Dell EMC SD-WAN Edge 3000 Series Installation Guide
- Disclaimer for Third Party Content
- About this guide
- Edge 3000 Series
- Site preparations
- Edge 3000 Series installation
- Platform setup
- Power supplies
- Fans
- Management ports
- User interface
- Specifications
- Dell EMC support
Table 2. Edge 3000 Series LED behavior (continued)
LED Description
10 GbE SFP+ port LEDs—SFP3 and SFP4
● Off—No link
● Solid green—Link operating at maximum speed, 10G
● Solid yellow—Link operating at a lower speed, 1G
● Flashing green—port activity for 10G
● Flashing yellow—port activity for 1G
Table 3. BMC and CPU Console and management Ethernet port LEDs
LED Description
Link LED
● Off—No link
● Solid green—Link operating at a maximum speed,
autonegotiated/forced or 1G
● Solid yellow—Link operating at a lower speed,
autonegotiated/forced or 10/100M
Activity LED
● Off—No link
● Flashing green—Port activity
Prerequisites
For installation instructions, see Site preparations and Edge 3000 Series installation.
The following is a list of components need to install the Edge 3000 Series platform:
● Dell EMC SD-WAN Edge 3400 or 3800 platform
● AC country- and regional-specific cables
● Two-post rail kit mounting brackets for rack installation, included
● Screws for rack installation
● #1 and #2 Phillips screwdrivers, not included
● M2 Philips drive flat head screwdriver, not included
● Ground cable screws for L-bracket—order separately
● M3 ground lug assembly kit screw
● Copper/fiber cables
Other optional components are:
● Expansion card
● UL-certified ground lug assembly kit with bracket
● Extra mounting brackets for the four-post mount
Luggage tag
The Edge 3000 Series has a pull-out tag, known as a luggage tag, on the I/O-side of the platform. The front of the luggage tag
includes platform ID information.
Edge 3000 Series
11