Install Guide

NOTE: Do not the use the mounted rails as a shelf or a workplace.

To remove the platform, unscrew the rack-mounting screws and slide the platform forward.

Four-post installation

Installing the Edge 3000 platform in a four-post rack is optional. To use this procedure, you must purchase the four-post rack mounting kit

separately.

NOTE: For more installation instructions, see the installation labels attached to the rail assembly. To complete this

installation, supply eight rack-mounting screws.

1. Separate each rail assembly by sliding the inside rail out of the outside rail.

2. Attach the inner platform rails to the Edge 3000 Series platform.

Line up the half-holes on the rail with the mounting heads on the platform and attach the rail to the platform. Slide the rail back until it

locks into place.

3. Repeat on the other side of the platform.

4. Attach the platform rails to the four-post rack rails using two user-supplied screws on each side.

5. Slide the rear platform rail from the back to the front bracket. Secure with two user-supplied screws on each side.

Edge 3000 Series installation