Install Guide
LED Description
System LED
• Off - system off or in standby
• Solid green—Normal operation
• Flashing green—Booting
• Solid yellow (amber)—Critical system error or CPU power off.
• Flashing yellow—Noncritical system error, fan failure, or power
supply failure
Locator LED
• Off—Locator function disabled
• Flashing blue with 1 sec on and 1 sec off – Locator function
enabled
• Flashing blue with 2 sec on and 1 sec off – system in standby
Power LED
• Off - system off or in standby
• Solid Green—Normal operation
• Solid yellow—POST is in process
• Flashing yellow—Power supply failed
Fan LED
• Off - system off or in standby
• Solid green—Normal operation; fan powered and running at the
expected RPM
• Solid yellow—Fan failed
Temperature LED
• Off - system off or in standby
• Solid green—temperature is normal
• Solid yellow—temperature is at the limit
• Flashing yellow—temperature is over the limit
rNDC - System LED
• Off - system off or in standby
• Solid green—Normal operation
• Flashing green—Booting
• Solid yellow (amber)—Critical system error
• Flashing yellow—Noncritical system error
rNDC - Temperature LED
• Off - system off or in standby
• Solid green—temperature is normal
• Solid yellow—temperature is at the limit
• Flashing yellow—temperature is over the limit
10 GbE SFP+ port LEDs
• Off—No link
• Solid green—Link operating at maximum speed, 10G
• Solid yellow—Link operation and activity at a lower speed, 1G
• Flashing green—port activity for 10G
SD-WAN port LEDs—GE5 and GE6
• Off—No link
• Solid green—Link operating at maximum speed, 10G
• Solid yellow—Link operating at a lower speed, 1G
• Flashing green—port activity for 10G
• Flashing yellow—port activity for 1G
1 GbE copper port LEDs—same function as GE5 and GE6
• Off—No link
• Solid green—Link operating at maximum speed, 10G
• Solid yellow—Link operating at a lower speed, 1G
• Flashing green—port activity for 10G
• Flashing yellow—port activity for 1G
Edge 3000 Series 9