Install Guide

Site preparations

The Edge 510 LTE platform connects the service provider edge or small-to-medium branch locations.

Use the platform on a desktop or optionally install the platform in a wall or rack.

NOTE: If you optionally install the platform into a rack or cabinet, install the platform first, and then install any additional

components such as cables or optics.

Topics:

• Site selection

• Platform mounting

• Fans and airflow

• Power connection

• Storing components

Site selection

Ensure that the area where you install your platform meets the following safety requirements:

● Near an adequate power source

● Connected to a properly grounded power outlet

WARNING:

Earth the Edge 510 LTE. Connect the Edge 510 LTE to an outlet that is a properly wired, earth-

ground socket outlet.

● Environmental—platform location—continuous temperature range is 0°C to 40°C (32°F to 104°F)

● Operating humidity:

○ 5% to 85% (RH), noncondensing continuously

○ 5% to 90% (RH), noncondensing Short term (< 1% of operational hour per year)

● In a dry, clean, well-ventilated, and temperature-controlled room, away from heat sources such as hot air vents or direct

sunlight

● Away from sources of severe electromagnetic noise

For more information about platform storage and environment temperatures, see Specifications.

Platform mounting

The Edge 510 LTE supports the following mounting options:

● Desktop placement using rubber feet

● Wall-mounting using wall mount brackets

● Rack-mounting using the optional rackmount tray

Rack and platform ground

Ensure that you install in the platform in a grounded rack. Ground the rack to the same ground point the power service in your

area uses. The ground path must be permanent.

Site preparations 9