Dell EMC SD-WAN Edge 600 Series Setup Guide August 2019
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Edge 600 Series..............................................................................4 Installation instructions ........................................................................... 4 Specifications............................................................................................
Edge 600 Series The Dell EMC SD-WAN Edge 600 Series (610, 620, 640, and 680) is a purpose-built, highvalue uCPE platform to host virtual networking functions (VNFs). For detailed installation information, including instructions for the wall mount and optional dual rackmount tray installation, see the Dell EMC SD-WAN Edge 600 Series Installation Guide at www.dell.com/support. After unpacking the Edge 600 Series, inspect the device and immediately report any damage to your Dell EMC sales representative.
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures. Install the device in an area that meets the following safety requirements: • • • • • Near a properly grounded AC power outlet.
a 1—SFP 1-2 b 2—GE 3-6 NOTE: By default, the Edge gets a DHCP IP address from the ISP on the WAN uplink. When the WAN connection is fully operational, the cloud LED on the front of the Edge is green. 3 If you received an email from your IT administrator, follow the instructions in the email to complete the Edge activation. If you did not receive an email, request the setup instructions from your IT administrator or find more information at the Dell EMC support site at www.dell.com/ support.
After following these instructions, if you are still unable to activate the Edge, contact your IT administrator or open a Dell EMC support request. Specifications Table 1. Edge 600 Series specifications Feature Specification Size 8.1 in x 7.9 in x 2.0 in (W x D x H) 20.8 cm x 20.0 cm x 5.20 cm (W x D x H) Weight, depending on the product NOTE: Platform weight does not include power adapter weight. 2.87 lb to 3.11 lb 1.30 Kg to 1.
Table 2.