Users Guide
Command line options
DSDP supports the command line options supported in Dell Deployment Toolkit.
For more information about the command line options, usage guidelines, and syntax, see Dell OpenManage Deployment Toolkit Version 4.4
Command Line Interface Reference Guide
.
The SYSCFG and RAIDCFG commands are supported in DSDP
• SYSCFG — The Deployment Toolkit (DTK) system conguration utility SYSCFG commands enable you to run commands to get
information about conguration le format, and individual executables used to congure server BIOS, DTK state settings, and system
information including PCI device detection.
• RAIDCFG — The Deployment Toolkit (DTK) RAID conguration utility RAIDCFG provides commands to congure all supported RAID
controllers.
NOTE: To get correct results, it is recommended that you type command line options in the Task Sequence wizard.
—acpower
Table 3. SYSCFG Command
Option
--acpower
Valid Arguments on, o, last
Description Sets the behavior for the system after AC power is lost. This option species how the
system responds to the restoration of AC power and is particularly useful in systems that
are turned o using a power strip. When set to on, the system turns on after AC is restored.
When set to o, the system does not turn on after AC is restored. When set to last, the
system turns on if the system was on when AC power was lost. If the system was o when
AC power was lost, the system remains o when power is restored. This option can be
replicated.
Example:
A:>syscfg --acpower=on acpower=on
Applicable Systems All Dell PowerEdge systems prior to PowerEdge 12G systems.
When using this command in DSDP, remove syscfg and run the command
--acpower=on acpower=on
Table 4. RAIDCFG Command
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-vd -vd=id -
ac=svdn - vdn=
<string> - c=id or
vdisk vdisk= id
action= setvdname
NA NA
Sets the name of the specied virtual disk on the
specied controller.
5
32 Command line options