Dell EMC Server Deployment Pack Version 4.1 pour Microsoft System Center Configuration Manager Guide d'installation July 2020 Rév.
Remarques, précautions et avertissements REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre produit. PRÉCAUTION : Une PRÉCAUTION indique un risque d'endommagement du matériel ou de perte de données et vous indique comment éviter le problème. AVERTISSEMENT : Un AVERTISSEMENT indique un risque d'endommagement du matériel, de blessures corporelles ou même de mort. © 2020 Dell Inc. ou ses filiales. Tous droits réservés.
Table des matières Chapitre 1: Présentation.................................................................................................................. 4 Nouveautés de cette version............................................................................................................................................... 4 Pré-requis et exigences........................................................................................................................................................
1 Présentation Ce guide fournit des informations sur les prérequis et les exigences logiciels pour installer et désinstaller Dell EMC Server Deployment Pack (DSDP) pour Microsoft System Center Configuration Manager (Configuration Manager).
• Prise en charge des serveurs PowerEdge basés sur l’iDRAC 9 Pour plus d’informations sur les serveurs PowerEdge basés sur l’iDRAC 9, reportez-vous à la section Serveurs PowerEdge basés sur l’iDRAC 9. Les derniers serveurs PowerEdge basés sur l’iDRAC 9 sont les suivants : ○ ○ ○ ○ ○ PowerEdge R6515 PowerEdge R6525 PowerEdge R7515 PowerEdge R7525 PowerEdge C6525 REMARQUE : Les derniers serveurs PowerEdge basés sur l’iDRAC 9 sont pris en charge par la version 4.1 de Dell EMC Server Deployment Pack.
• • • • .NET 4.0 est installé sur le système où vous souhaitez installer DSDP. La console d'administration ou Configuration Manager est installé sur le serveur du site principal. Avant d'installer ou de désinstaller DSDP, assurez-vous que le fournisseur SMS est activé et en cours d'exécution. Les configurations de serveurs de sites suivantes sont prises en charge : ○ Options : ○ ○ ○ ○ ▪ Lorsque Configuration Manager et les fournisseurs SMS sont installés dans le même système.
Tableau 1. Systèmes d’exploitation compatibles, versions DTK et versions AIK/ADK prises en charge par Dell EMC Server Deployment Pack pour WinPE (suite) Version System Center Version WinPE Configuration Manager Déploiement de systèmes d’exploitation Mise à jour 1910 pour Configuration Manager • • • 10.1 Versions DTK Windows Server 2019 • Windows Server 2016 Windows Server 2012 R2 • Mise à jour 1906 pour Configuration Manager 10.
Tableau 1. Systèmes d’exploitation compatibles, versions DTK et versions AIK/ADK prises en charge par Dell EMC Server Deployment Pack pour WinPE (suite) Version System Center Version WinPE Configuration Manager Déploiement de systèmes d’exploitation System Center Configuration Manager 2016 • • 10 Versions DTK Windows Server 2016 • Windows Server 2012 R2 • System Center Configuration Manager 2012 R2 SP1 5.0 • • • System Center Configuration Manager 2012 R2 5.
1. Allez à Dell.com/support, puis cliquez sur Pilotes et téléchargements. 2. Téléchargez le fichier et enregistrez-le sur le disque local. 3. Accédez à l’emplacement de téléchargement du fichier, puis double-cliquez sur le nouveau fichier pour décompresser le package téléchargé. 4. Spécifiez l’emplacement de décompression des fichiers, puis cliquez sur le bouton Décompresser pour extraire les fichiers : • • DellEMC_Server_Deployment_Pack_v4.1.0.
6. Cliquez sur Oui. L'écran Supprimer/ conserver les utilitaires Dell Deployment ToolKit (DTK) et les pilotes Windows PE qui apparaît affiche les options suivantes : • • Conserver les utilitaires Dell Deployment ToolKit (DTK) et les pilotes Windows PE : sélectionnez cette option pour conserver les utilitaires DTK et les pilotes Windows PE importés dans Configuration Manager au cours de l’installation précédente de Dell EMC Server Deployment Pack.
Vous pouvez également désinstaller DSDP en exécutant le fichier exécutable utilisé pour l’installation et en suivant les instructions de désinstallation. REMARQUE : Supprimez toutes les séquences de tâches DSDP avant de désinstaller DSDP. Vous ne pouvez pas utiliser les séquences de tâches après avoir désinstallé DSDP.
à jour 1906 pour Configuration Manager, ou la mise à jour 1810 pour Configuration Manager, ou System Center Configuration Manager 2016 ou System Center Configuration Manager 2012 avec DSDP 4.0. REMARQUE : Vous pouvez uniquement mettre à niveau DSDP 4.0 vers DSDP 4.1. Mise à niveau avec l'option Conserver les utilitaires Dell Deployment ToolKit (DTK) et les pilotes Windows PE 1. Ouvrez une fenêtre d'Invite de commande. 2.
L’intégrité des pilotes de périphérique PCI affiche un état critique Après le déploiement du système d’exploitation, l’intégrité des pilotes de périphérique PCI affiche un état critique pour les derniers serveurs PowerEdge basés sur l’iDRAC 9 sous Gestionnaire de périphériques > Autres périphériques. Contournement : assurez-vous de télécharger les derniers pilotes de périphérique PCI à partir du site dell.com/support, puis mettez-les à jour.
• • • Le Guide de l’utilisateur Dell OpenManage Deployment ToolKit présente les procédures générales liées aux meilleures pratiques pour les tâches de base à exécuter en vue d’un déploiement réussi dans l’environnement de préinstallation Windows (Windows PE) ou dans l’environnement Linux intégré.