Reference Guide

Rev. A08
February 2021
PowerVault NX Series Product Support Matrix
Introduction
This document provides information about supported software, firmware, and hardware for PowerVault NX Series Network
Attached Storage (NAS) systems.
Topics:
Revision history
PowerVault NX Series NAS Systems
Operating system
NX Series NAS systems are used to add easily managed and cost-optimized file storage to a network. The NAS systems are
optimized servers that are dedicated to file serving (with print server capabilities) and can be managed remotely. The NX Series
systems ship with the Windows Storage Server operating system preinstalled, so the system can be up and running in a short
time.
NOTE:
This Support Matrix contains the latest compatibility and interoperability information. If you observe inconsistencies
between this information and other documentation or references, this document supersedes all other documentation.
NOTE: Refer to the Dell EMC Storage NX Windows NAS Series Configuration Guide for configuration examples specific to
your business.
Revision history
Revision
Date Description
A00 January 2019 Initial release
A01 May 2019 Add NX440 product information
A02 May 2019 Update disk quantity for NX440
A03 August 2019 Remove NX430
A04 October 2019 Update microprocessor for NX3240 and NX3340
A05 April 2020 Update supported drive lists
A06 August 2020 Add information about supported upgrades
A07 September 2020 Add information about supported FC cards
A08 February 2021 Add information about supported drives and storage options
Introduction 1

Summary of content (20 pages)