Owners Manual
Table Of Contents
- PowerVault NX3340 Network Attached Storage System Installation and Service Manual
- Contents
- NX3340 system product overview
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- System Information
- Viewing System Information
- System Information details
- Memory Settings
- Viewing Memory Settings
- Memory Settings details
- Processor Settings
- Viewing Processor Settings
- Processor Settings details
- SATA Settings
- Viewing SATA Settings
- SATA Settings details
- Boot Settings
- Viewing Boot Settings
- Boot Settings details
- Choosing system boot mode
- Changing boot order
- Integrated Devices
- Viewing Integrated Devices
- Integrated Devices details
- Serial Communication
- Viewing Serial Communication
- Serial Communication details
- System Profile Settings
- Viewing System Profile Settings
- System Profile Settings details
- System Security
- Viewing System Security
- System Security Settings details
- Creating a system and setup password
- Using your system password to secure your system
- Deleting or changing system and setup password
- Operating with setup password enabled
- Miscellaneous Settings
- Viewing Miscellaneous Settings
- Miscellaneous Settings details
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Diagnostics and indicators
- Jumpers and connectors
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Front bezel
- System cover
- Backplane cover
- Inside the system
- Air shroud
- Cooling fans
- System memory
- Processors and heat sinks
- Expansion cards and expansion card risers
- Network daughter card
- Integrated storage controller card
- Hard drives
- Drive backplane
- System battery
- USB module
- Optional internal USB memory key
- Optical drive—optional
- Power supply units
- System board
- Trusted Platform Module
- Control panel
- Getting help
NOTE: The expansion card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 12. Riser configurations: 1A + 2A
Card type Slot priority Form factor
Adapter RAID (Dell design) 1 Low Profile
Infiniband HCA EDR (Mellanox) 1, 2, 3 Low Profile
100G NICs (Mellanox) 1, 2, 3 Low Profile
Omni-Path HFI (Intel) 1, 2, 3 Low Profile
Infiniband HCA FDR (Mellanox) 1, 2, 3 Low Profile
40G NICs (Intel) 1, 2, 3 Low Profile
40G NICs (Mellanox) 1, 2, 3 Low Profile
FC32 HBA (QLogic) 1, 2, 3 Low Profile
FC32 HBA (Emulex) 1, 2, 3 Low Profile
25G NICs (Broadcom) 1, 2, 3 Low Profile
25G NICs (Mellanox) 1, 2, 3 Low Profile
25G NICs (QLogic) 1, 2, 3 Low Profile
FC16 HBA (QLogic) 1, 2, 3 Low Profile
FC16 HBA (Emulex) 1, 2, 3 Low Profile
10Gb NICs (Broadcom) 1, 2, 3 Low Profile
10Gb NICs (Intel) 1, 2, 3 Low Profile
10Gb NICs (Mellanox) 1, 2, 3 Low Profile
10Gb NICs (QLogic) 1, 2, 3 Low Profile
10Gb NICs (Solarflare) 1, 2, 3 Low Profile
FC8 HBA (Emulex) 1, 3 Low Profile
FC8 HBA (QLogic) 1, 2, 3 Low Profile
1Gb NICs (Broadcom) 1, 2, 3 Low Profile
1Gb NICs (Intel) 1, 2, 3 Low Profile
External RAID (Dell design) 1, 2, 3 Low Profile
Non-RAID (Dell design) 1, 3 Low Profile
Integrated RAID (Dell design) Integrated Slot NONE
rNDC (Broadcom) Integrated Slot NONE
rNDC (Intel) Integrated Slot NONE
rNDC (Mellanox) Integrated Slot NONE
rNDC (QLogic) Integrated Slot NONE
Table 13. Riser configurations:1A
Card type Slot priority Form factor
Adapter RAID (Dell design) 1 Low Profile
78 Installing and removing system components