Owners Manual

Table 2. Memory specifications
DIMM type DIMM rank DIMM capacity
Dual processors
Minimum RAM Maximum RAM
RDIMM Single rank 8 GB 16 GB 192 GB
Storage controller specifications
The NX3340 system supports:
● Internal storage controller cards: PowerEdge RAID Controller (PERC) H730P Mini.
● External storage controller cards: PERC H840 and 12 GB SAS HBA.
● External storage:
○ Two external enclosures for clustering: 12 Gbp/s MD JBOD - MD1400, MD1420, and SC Series.
○ External Tape: LTO external drive, PV114x, TL1000, TL2000, TL4000, ML6000
Drive specifications
The NX3340 system supports up to eight 2.5" SAS, and SATA hard drives and an optional optical drive.
The system ships with either two or four OS drives. Additional data drives must be ordered separately from the factory.
Ports and connectors specifications
The NX3340 system supports USB ports, NIC ports, VGA ports, and a serial connector.
USB ports
The NX3340 supports both USB 2.0 and USB 3.0-compliant ports.
Location
Type Quantity
Front panel USB 2.0-compliant port One
Front panel Micro USB 2.0-compliant port for iDRAC Direct One
Back panel USB 3.0-compliant port Two
Internal USB 3.0-compliant port One
NOTE: The micro USB 2.0-compliant port on the front panel can only be used as an iDRAC Direct or a management port.
NIC ports
The NX3340 system supports up to four Network Interface Controller (NIC) ports that are integrated on the network daughter
card (NDC). The ports are available in the following configurations.
● Four RJ-45 ports that support 10, 100 and 1000 Mbps
● Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
● Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 G
● Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
● Four SFP+ ports that support up to 10 Gbps
● Two SFP28 ports that support up to 25 Gbps
NOTE: You can install up to three PCIe add-on NIC cards.
Technical specifications 17