Owners Manual

Installing an expansion card riser
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Before installing the expansion card riser 2A, install an expansion card into the riser, if applicable.
Steps
1. If removed, install the expansion cards into the expansion card riser.
2. Hold the touch points, and align the expansion card riser with the connector and the riser guide pin on the system board.
3. Lower the expansion card riser into place until the expansion card riser connector is fully seated in the connector.
Figure 40. Installing the expansion riser 1A
Figure 41. Installing the expansion riser 2A
Next steps
1. Follow the procedures in After working inside your system.
82
Installing and removing system components