Owners Manual

Figure 14. Removing the air shroud

Next step

Install the air shroud.

Installing the air shroud

Prerequisite

1 Follow the safety guidelines listed in Safety instructions.

Steps

1 Insert the air shroud into the sled, aligning the shroud hinge with slot on the sled chassis.

NOTE

: Ensure that both the SATA cables are routed through the air shroud cable guide slot behind the air shroud latches.

NOTE: Ensure that neither of the cables are pinched or pressed under the air shroud.

2 Press the air shroud until the locks click into place.

Installing and removing system components