Owners Manual

Figure 33. Removing a mezzanine card

Next step

Install the mezzanine card or the mezzanine card ller bracket.

Installing a mezzanine card

Prerequisite

NOTE

: The procedure to install the mezzanine blank is similar to the removal of a mezzanine card.

1 Follow the safety guidelines listed in Safety instructions.

Steps

1 Attach and secure the mezzanine card bracket to the mezzanine card.

2 Holding the card by its edges, position the card so that the card edge connector aligns with the connector of the bridge board on the

system board.

Installing and removing system components