Reference Guide

Steps
1. Log into the iDRAC web interface.
2. On the Job Queue tab, select all jobs and then delete them.
Optionally, you can delete job queues by running this script from RACADM. You can accomplish this from a management
system in the same environment.
racadm -r ip address -u user name -p password jobqueue delete -i JID_CLEARALL_FORCE
3. In Prism, from the Home drop-down menu, select LCM.
4. On the Inventory tab, click Perform Inventory.
Verify iDRAC version
To verify the iDRAC version, check the host for the iDRAC version. After the LCM update, verify that the Dell EMC payloads
have taken place.
About this task
To apply iDRAC 4.00.00.00 version of firmware, the iDRAC must be at firmware version 3.30.30.30 or later.
You can find the KB solution details here.
Prerequisites
11