CLI Guide

NIC.VndrConfigPage.RDMANICModeOnPort (Read or Write)
Description
Enable/Disable the NIC + RDMA personality on the port. This setting is for when operating in non-NPar
mode only. Note: This personality type may be specified as the port default if RDMA traffic can be
supported irrespective of any other device mode or setting.
Legal Values
● Enabled
● Disabled
Default Value Varies
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.VndrConfigPage.RemotePHY (Read Only)
Description
Indicates whether RemotePHY capability is supported.
Legal Values
● Available
● Unavailable
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.VndrConfigPage.RXFlowControl (Read Only)
Description
Indicates whether Receive (RX) Flow control capability is supported.
Legal Values
● Available
● Unavailable
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.VndrConfigPage.SNAPI (Read Only)
Description
Indicates the adapter supports SNAPI functionality by either special interfacing to the PCI slot connector
or via cabling to another PCI slot.
Legal Values
● Available
● Unavailable
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC Attributes 949