Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 用户指南
- 目录
- iDRAC 概览
- 登录 iDRAC
- 强制更改密码 (FCP)
- 使用 OpenID Connect 登录 iDRAC
- Logging in to iDRAC as local user, Active Directory user, or LDAP user
- 使用智能卡作为本地用户登录 iDRAC
- 使用单一登录登录 iDRAC
- 使用远程 RACADM 访问 iDRAC
- 使用本地 RACADM 访问 iDRAC
- 使用固件 RACADM 访问 iDRAC
- 简单的双重身份验证(简单 2FA)
- RSA SecurID 2FA
- 查看系统运行状况
- 使用公共密钥验证登录 iDRAC
- 多个 iDRAC 会话
- 安全默认密码
- 更改默认登录密码
- 启用或禁用默认密码警告消息
- 密码强度策略
- IP 阻止
- 使用 Web 界面启用或禁用 OS 到 iDRAC 直通
- 使用 RACADM 启用或禁用警报
- 设置受管系统
- 设置 iDRAC IP 地址
- 修改本地管理员帐户设置
- 设置受管系统位置
- 优化系统性能和功耗
- 设置管理站
- 配置支持的 Web 浏览器
- Updating device firmware
- 查看和管理分阶段更新
- 回滚设备固件
- 轻松还原
- 使用其他系统管理工具监测 iDRAC
- 支持服务器配置配置文件 — 导入和导出
- BIOS 设置或 F2 中的安全引导配置
- BIOS 恢复
- Plugin Management
- 配置 iDRAC
- 使用 OAuth 2.0 的委派授权
- 查看 iDRAC 和受管系统信息
- 设置 iDRAC 通信
- 配置用户帐户和权限
- 系统配置锁定模式
- 配置 iDRAC 以进行单一登录或智能卡登录
- 配置 iDRAC 以发送警报
- iDRAC 9 Group Manager
- 管理日志
- 在 iDRAC 中监测和管理电源
- iDRAC Direct Updates
- 对网络设备执行资源清册、监测和配置操作
- Managing storage devices
- BIOS 设置
- 配置并使用虚拟控制台
- 使用 iDRAC 服务模块
- 使用 USB 端口进行服务器管理
- 使用 Quick Sync 2
- 管理虚拟介质
- 管理 vFlash SD 卡
- 使用 SMCLP
- 部署操作系统
- 使用 iDRAC 排除受管系统故障
- iDRAC 中的 SupportAssist 集成
- 常见问题
- 使用案例场景
● iDRAC
● RAID controller
● Batteries
● CPUs
● DIMMs
● HDDs
● Backplanes
● Network Interface Cards (integrated and embedded)
● Video card
● SD card
● Power Supply Units (PSUs)
● Fans
● Fibre Channel HBAs
● USB
● NVMe PCIe SSD devices
The Firmware Inventory section displays the firmware version for the following components:
● BIOS
● Lifecycle Controller
● iDRAC
● OS driver pack
● 32-bit diagnostics
● System CPLD
● PERC controllers
● Batteries
● Physical disks
● Power supply
● NIC
● Fibre Channel
● Backplane
● Enclosure
● PCIe SSDs
NOTE:
● Software inventory displays only the last 4 bytes of the firmware version and the Release date information. For example, if the
firmware version is FLVDL06, the firmware inventory displays DL06.
● When collecting software inventory using Redfish interface, the Release date information is displayed only for components which
support rollback.
NOTE:
● If any device (Example: TPM) is in OFF state, then software inventory displays the version as Not Available or 0. And if the
application is not installed, then it shows the version as Not Installed.
● The default initial system date and time is shown as Installed date/ time in software inventory until a new device firmware version
is installed using the DUP. Also, BIOS and iDRAC date/ time should be synchronized for components whose inventory details are
obtained from BIOS (Example: BIOS, TPM).
● Installation date do not change if the updated version is same as the installed version.
NOTE: On the Dell PowerEdge FX2/FX2s servers, the naming convention of the CMC version displayed in the iDRAC GUI differs
from that on the CMC GUI. However, the version remains the same.
When you replace any hardware component or update the firmware versions, make sure to enable and run the Collect System
Inventory on Reboot (CSIOR) option to collect the system inventory on reboot. After a few minutes, log in to iDRAC, and navigate to
the System Inventory page to view the details. It may take up to 5 minutes for the information to be available depending on the
hardware installed on the server.
NOTE: CSIOR option is enabled by default.
NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly in the
inventory until you perform a server restart.
查看 iDRAC 和受管系统信息 107