Service Manual

Table 12. System Information details (continued)
Option Description
DXIO Version Specifies the DXIO firmware version.
Memory settings
To view the Memory Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Memory Settings.
Table 13. Memory Settings details
Option Description
System Memory Size Specifies the memory size in the system.
System Memory Type Specifies the type of memory that is installed in the system.
System Memory Speed Specifies the system memory speed.
System Memory Voltage Specifies the system memory voltage.
Video Memory Specifies the amount of video memory.
System Memory Testing Specifies whether the system memory tests are run during system boot.
The two options available are Enabled and Disabled. This option is set to
Disabled by default.
Memory Operating Mode Specifies the memory operating mode. The option is available and is set to
Optimizer Mode, by default.
Current State of Memory Operating Mode Specifies the current state of the memory operating mode.
Memory Interleaving Enables or disables the memory interleaving option. The two options
available are Auto and Disabled. This option is set to Auto by default.
Opportunistic Self-Refresh Enables or disables opportunistic self-refresh feature. This option is set to
Disabled by default.
Correctable Error Logging Enables or disables correctable error logging. This option is set to
Enabled by default.
Table 14. Memory Settings details
Option Description
System Memory Size Specifies the memory size in the system.
System Memory Type Specifies the type of memory that is installed in the system.
System Memory Speed Specifies the system memory speed.
System Memory Voltage Specifies the system memory voltage.
Video Memory Specifies the amount of video memory.
System Memory Testing Specifies whether the system memory tests are run during system boot.
The two options available are Enabled and Disabled. This option is set to
Disabled by default.
Memory Operating Mode Specifies the memory operating mode. The option is available and is set to
Optimizer Mode, by default.
Current State of Memory Operating Mode Specifies the mode that is selected in the memory operating mode.
Memory Interleaving Enables or disables the memory interleaving option. The two options
available are Auto and Disabled. This option is set to Auto by default.
Opportunistic Self-Refresh Enables or disables opportunistic self-refresh feature. This option is set to
Disabled by default.
34 Pre-operating system management applications