Manualshelf

Service Manual

ManualsBrandsDell ManualsAX NodesEMC XC Core XC6515
51525354555657585960
Install the front bezel
The procedure to install the front bezel with and without the LCD panel is the same.
Prerequisites
● Follow the safety guidelines listed in the Safety instructions.
● Locate and remove the bezel key.
The bezel key is part of the LCD bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the system.
2. Press the bezel until the release button clicks in place.
3. Lock the bezel.
Figure 15. Installing the front bezel with the LCD panel
System cover
Remove the system cover
Prerequisites
● Follow the safety guidelines listed in the Safety instructions on page 51.
● Power off the system, and any attached peripherals.
● Disconnect the system from the electrical outlet and peripherals.
Steps
1. Use a 0.635 cm (0.25 inches) flat head or a Phillips number 2 screwdriver to rotate the lock counterclockwise to the unlock
position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
54
Installing and removing system components