Administrator Guide

If you initiate configuration jobs using RACADM CLI or iDRAC web interface, the Lifecycle log captures the information about
the user, interface used, and the IP address of the system from which you initiate the job.
Proxy parameters
Some commands do not support setting the proxy parameters if the share location (-l) is HTTP/HTTPS. To perform
the operation with HTTP or HTTPS through a proxy, the proxy parameters must be first configured using the
lifecyclecontroller.lcattributes. Once these proxy parameters are configured, they become the part of default configuration;
the proxy attributes should be cleared to end use of the HTTP/HTTPS proxy.
The valid lifecyclecontroller.lcattributes HTTP/HTTPS proxy parameters are:
● UserProxyUserName
● UserProxyPassword
● UserProxyServer
● UserProxyPort
● UserProxyType
To view the list of proxy attributes, use racadm get lifecycleController.lcAttributes.
NOTE: Squid proxy configuration is not supported to access HTTP/HTTPS shares.
Supported PowerEdge RAID Controller cards
The following table lists the supported PowerEdge RAID Controller cards:
PERC 10 PERC H345, PERC H740, PERC H740P, PERC H745P, and PERC H840
PERC 9 PERC H330, PERC H730, PERC H730P, PERC H830, PERC FD33xS, and PERC FD33xD
PERC 8 PERC H310 , PERC H710, PERC H710P, and PERC H810
HBA cards HBA330, HBA345, and 12Gbps SAS HBA
Other Documents You May Need
In addition to this guide, you can access the following guides available on the Dell Support website at https://www.dell.com/
idracmanuals. To access the documents, click the appropriate product link.
● The Integrated Dell Remote Access Controller User’s Guide provides information about configuring and using an iDRAC to
remotely manage and monitor your system and its shared resources through a network.
● The iDRAC9 Attribute Registry provides information about all attributes to perform get and set operations using RACADM
interface.
● Documentation specific to your third-party management console application.
● The Dell OpenManage Server Administrator’s User’s Guide provides information about installing and using Dell OpenManage
Server Administrator.
● The Dell Update Packages User's Guide provides information about obtaining and using Dell Update Packages as part of your
system update strategy.
● The Glossary provides information about the terms used in this document.
The following system documents are also available to provide more information about the system in which iDRAC is installed:
● The Hardware Owner’s Manual provides information about system features and describes how to troubleshoot the system
and install or replace system components.
● Documentation for any components you purchased separately provides information to configure and install the options.
● Release notes or readme files may be included to provide last-minute updates to the system or documentation or advanced
technical reference material intended for experienced users or technicians.
Updates are sometimes included with the system to describe changes to the system, software, and/or documentation. Always
read the updates first because they often supersede information in other documents.
See the Safety and Regulatory information that is shipped with your system.
Introduction
19