Owners Manual
Table Of Contents
- Dell EMC XC740xd XC Series Appliance and XC Core System Installation and Service Manual
- Contents
- Overview
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- System Information
- Viewing System Information
- System Information details
- Memory Settings
- Viewing Memory Settings
- Memory Settings details
- Persistent Memory details
- Processor Settings
- Viewing Processor Settings
- Processor Settings details
- SATA Settings
- Viewing SATA Settings
- SATA Settings details
- Boot Settings
- Viewing Boot Settings
- Boot Settings details
- Choosing system boot mode
- Changing boot order
- Network Settings
- Viewing Network Settings
- Network Settings screen details
- UEFI iSCSI Settings
- Viewing UEFI iSCSI Settings
- UEFI iSCSI Settings details
- Integrated Devices
- Viewing Integrated Devices
- Integrated Devices details
- Serial Communication
- Viewing Serial Communication
- Serial Communication details
- System Profile Settings
- Viewing System Profile Settings
- System Profile Settings details
- System Security
- Viewing System Security
- System Security Settings details
- Creating a system and setup password
- Using your system password to secure your system
- Deleting or changing system and setup password
- Operating with setup password enabled
- Redundant OS Control
- Viewing Redundant OS Control
- Redundant OS Control screen details
- Miscellaneous Settings
- Viewing Miscellaneous Settings
- Miscellaneous Settings details
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System cover
- Backplane cover
- Inside the system
- Air shroud
- Cooling-fan assembly
- Cooling fans
- Intrusion switch
- Hard drives
- System memory
- Processors and heat sinks
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Opening and closing the PCIe card holder latch
- Removing the expansion card from expansion card riser
- Installing an expansion card into the expansion card riser
- Removing an expansion card riser 1
- Installing an expansion card riser 1
- Removing an expansion card riser 2
- Installing an expansion card riser 2
- Removing an expansion card riser 3
- Installing an expansion card riser 3
- IDSDM/vFlash card
- Network daughter card
- Hard drive backplane
- System battery
- Power supply units
- System board
- Trusted Platform Module
- Control panel
- Using system diagnostics
- Jumpers and connectors
- Getting help
- BOSS card
PSU specifications
The XC740xd Series Hyper-converged Appliance supports up to two AC or DC power supply units (PSUs).
Table 17. PSU specifications
PSU Class Heat dissipation
(maximum)
Frequency Voltage Current
750 W AC Platinum 2891 BTU/hr 50/60 Hz 100–240 V AC, autoranging 10 A–5 A
750 W AC Titanium 2843 BTU/hr 50/60 Hz 200–240 V AC, autoranging 5 A
1100 W AC Platinum 4100 BTU/hr 50/60 Hz 100–240 V AC, autoranging 12 A–6.5 A
1100 W DC N/A 4416 BTU/hr N/A –(48–60) V DC, autoranging 32 A
1600 W AC Platinum 6000 BTU/hr 50/60 Hz 100–240 V AC, autoranging 10 A
2000 W AC Platinum 7500 BTU/hr 50/60 Hz 100–240 V AC, autoranging 11.5 A
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 240
V.
NOTE: If a system with 2000 W AC PSU operates at low line 100–120 V AC, then the power rating per PSU is derated to
1000 W.
NOTE: If a system with 1600 W AC PSU operates at low line 100–120 V AC, then the power rating per PSU is derated to
800 W.
NOTE: If system with 1100 W AC PSU operates at low line 100–120 V AC, then the power rating per PSU is derated to 1050
W.
System battery specifications
The XC740xd Series Hyper-converged Appliances support CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The XC740xd Series Hyper-converged Appliances support up to eight PCI express (PCIe) generation 3 expansion cards that
can be installed on the system board using expansion card risers. The following table provides detailed information about the
expansion card riser specifications:
Table 18. Expansion card riser specifications
Riser
configuration
and supported
risers
Slot
description
PCIe slots on
riser 1 (Height
and length)
Processo
r
connectio
n
PCIe slots on
riser 2 (Height
and length)
Processor
connectio
n
PCIe slots on
riser 3 (Height
and length)
Processo
r
connecti
on
Riser
configuration 4
(1A+2A+3A)
Three x8 and
four x16 slots
Slot 1: x16 full-
height, full
length
Processor
1
Slot 4: x16 full-
height, full length
Processor
2
Slot 7: x8 full-
height, full
length
Processor
2
N/A N/A Slot 5: x8 full-
height, full length
Processor
2
Slot 8: x16 full-
height, full
length
Processor
2
Slot 3: x16 full-
height, half
length
Processor
1
Slot 6: x8 low
profile, half
length
Processor
1
Slot 7: x8 full-
height, full
length
Processor
2
22 Technical specifications