CLI Guide

BIOS.SysProfileSettings.Proc4TurboCoreNum (Read or Write)
Description
Controls the number of Turbo Boost enabled cores for processor 4. By reducing the number of cores
enabled with Turbo Boost, the maximum turbo frequency on the cores with Turbo Boost may be higher.
Read-only unless System Profile is set to Custom, Turbo Boost is set to Enabled and CPU Power
Management is set to Maximum Performance.
Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom. Is set to
All for all the other System Profiles..
Legal Values
● All
● 1
● 2
● 4
● 6
● 8
● 10
● 12
● 14
● 16
● 18
● 20
● 22
● 24
● 26
● 28
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SysProfileSettings.ProcC1E (Read or Write)
Description
When set to Enabled, the processor is allowed to switch to minimum performance state when idle.
Read-only unless System Profile is set to Custom.
Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom. Is set
to Enabled if the System Profile is set to Performance Per Watt (DAPC), Performance Per Watt (OS),
Performance Per Watt (HWPM), or Dense. Is set to Disabled if the System Profile is set to Performance.
Legal Values
● Enabled
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SysProfileSettings.ProcCStates (Read or Write)
Description
C States allow the processor to enter lower power states when idle. When set to Enabled (OS controlled)
or when set to Autonomous (if Hardware controlled is supported), the processor can operate in all
available Power States to save power, but may increase memory latency and frequency jitter. Read-only
unless System Profile is set to Custom.
BIOS Attributes 391