Users Guide
Table Of Contents
- Lifecycle Controllerユーザーズ ガイド
- 目次
- はじめに
- Lifecycle Controller の使用
- Operating system deployment
- 監視
- ファームウェアアップデート
- 設定
- システムコントロールパネルのアクセスオプション
- iDRAC の設定
- システム時刻と日付の設定
- RAID の設定
- ソフトウェア RAID を使用した RAID の設定
- RAID コントローラ上でのセキュアな仮想ディスクの作成
- Key encryption
- ローカルキー暗号化モード
- ミラードライブの解除
- System setup — Advanced Hardware Configuration
- Collect System Inventory On Restart
- ローカル USB ドライブの設定
- NFS および CIFS サーバーの設定
- Conditions while configuring HTTP or HTTPS server
- 保守
- 使いやすいシステムコンポーネント名
- セットアップユーティリティとブートマネージャの使用
- トラブルシューティングとよくあるお問い合わせ(FAQ)
監視
Lifecycle Controller を使用することにより、サーバーのライフサイクルを通じて、そのハードウェアインベントリとイベントを監視
することができます。
トピック:
• ハードウェアインベントリの表示とエクスポート
• About view and export current inventory
• 工場出荷時インベントリの表示とエクスポートについて
• ハードウェアインベントリの表示 - 現在または工場出荷時のインベントリ
• ハードウェアインベントリのエクスポート - 現在または工場出荷時のインベントリ
• 部品交換後のハードウェアインベントリの表示またはエクスポート
• Lifecycle Controller リセット後の現在のインベントリの表示またはエクスポート
• Lifecycle Controller ログ
ハードウェアインベントリの表示とエクスポート
Lifecycle Controller は、システムインベントリを管理するため、次のウィザードを提供します。
● [現在のインベントリの表示]
● [現在のインベントリのエクスポート]
● [工場出荷時のインベントリの表示]
● [工場出荷時のインベントリのエクスポート]
● [再起動時のシステムインベントリの収集]
About view and export current inventory
You can view information about the installed hardware components that are internal to the system chassis and the configuration for each
component. All the installed hardware components such as fans, PCI devices, NICs, DIMMs, PSU, and their properties and values are
displayed. You can export this information from a JSON file to a USB drive or network share. The JSON file is saved in the following
format: HardwareInventory_<servicetag>_<timestamp>.json.
For more information about the easy-to-use names of the hardware components, see Easy-To-Use System Component Names.
NOTE: Incorrect inventory data is displayed or exported after performing a system erase. For viewing the correct inventory data, see
Viewing and Exporting Current Inventory After Resetting Lifecycle Controller.
NOTE: The inventory that is displayed in the Lifecycle Controller GUI may not be the same as that of any iDRAC interfaces. To get
the updated inventory, run the CSIOR, wait for 2 minutes, reboot the host, and then enter the LCUI.
NOTE: Some attributes like Primary status/Rollup status might show as Unknown while collecting inventory data from LCUI. This is
expected based on the availability of RTCEM inventory.
工場出荷時インベントリの表示とエクスポートについて
工場出荷時に取り付けられたハードウェアコンポーネント、およびそれらの設定についての情報を表示することができます。この
情報は XML フォーマットで USB ドライブまたはネットワーク共有にエクスポートすることができます。XML ファイルは
FactoryShippedHWInventory_<servicetag>.xml というフォーマットで保存されます。
ハードウェアコンポーネントの使いやすい名前の詳細については、使いやすいシステムコンポーネント名を参照してください。
4
22 監視