Manualshelf

Users Guide

ManualsBrandsDell ManualsAX NodesEMC XC Core XC740xd System
241242243244245246247248249250
Table Of Contents
Identifier GUID-56115AB5-7EF2-4FE9-9A7A-F04593E418C4
Version 1
Status Translation Validated
Surveillance des émetteurs-récepteurs SFP à l’aide de l’interface
Web
Pour afficher les informations d’un émetteur-récepteur SFP à l’aide de l’interface Web, accédez à Système > Présentation >
Périphériques réseau, puis cliquez sur un périphérique particulier. Pour plus d’informations sur les propriétés affichées, voir l’aide en
ligne de l’iDRAC.
Le nom de la page affiche également le numéro du logement dans lequel l’émetteur-récepteur est disponible sous Statistiques des ports.
Identifier GUID-D5549593-D0D6-4EAD-91E5-F93BCF1876E7
Version 1
Status Translation Validated
Surveillance des émetteurs-récepteurs SFP à l’aide de RACADM
Pour afficher les informations des émetteurs-récepteurs SFP à l’aide de RACADM, utilisez la commande hwinventory.
Pour plus d’informations, consultez le document Guide de la CLI RACADM de l’iDRAC disponible à l’adresse https://www.dell.com/
idracmanuals.
Identifier
GUID-BB333215-C6B3-481A-A508-14C90412F4CB
Version 7
Status Released
Telemetry Streaming
Telemetry enables users to collect and stream real-time device metrics, events, and data logs from a PowerEdge server to a subscribed
external client or server application. Using Telemetry, you can set the type and frequency of reports that needs to be generated.
NOTE: The feature is supported on all the platforms and it requires iDRAC Datacenter license.
Telemetry is one-to-many solution for collecting and streaming the live system data from one or more PowerEdge servers (iDRAC) to a
centralized 'Remote Server Monitoring, Analysis, and Alerting service'. The feature also supports on-demand data collection of the data.
The telemetry data includes metrics/inventory and logs/events. The data can be streamed (pushed out) or collected (pulled) from iDRAC
to or by remote consumers like Redfish client and Remote Syslog Server. The telemetry data is also provided to the iDRAC SupportAssist
data collector on demand. The data collection and report is based on predefined Redfish telemetry metrics, trigger, and report definitions.
The telemetry streaming settings can be configured through RACADM, Redfish, and Server Configuration Profile (SCP).
To configure Telemetry, enable or select the required device reports or logs that define the behavior and frequency of data streaming. Go
to Configuration > System Settings page to configure Telemetry. Data streaming is automatic until the Telemetry is disabled.
Following table describes the metric reports that can be generated using telemetry:
Type
Metric Group Inventory Sensor Statistics Configuration Metrics
I/O Devices NICs No Yes Yes No No
FC HBAs No Yes Yes No No
Server Devices CPUs No Yes No No Yes
Memory No Yes No No Yes
Fans No Yes No No No
PSUs No No No No Yes
Sensors No Yes No No No
Environmental Thermal No Yes No No Yes
Power No No Yes No Yes
Performance No No Yes No No
Configuration, surveillance et inventaire des périphériques réseau 243