Manualshelf

Users Guide

ManualsBrandsDell ManualsAX NodesEMC XC Core XC740xd System
371372373374375376377378379380
Table Of Contents
Identifier GUID-35FC7515-B7FB-4E54-93F4-644FE3159917
Version 1
Status Translation Validated
iDRAC の再起動
サーバーの電源を切らずに、iDRAC のハード再起動あるいはソフト再起動を実行できます。
● ハード再起動 — サーバーで、LED ボタンを 15 秒間押し続けます。
● ソフト再起動 — iDRAC ウェブインタフェースまたは RACADM を使用します。
Identifier GUID-E1B52961-EF7C-48F1-AC6A-422FFE7E06F5
Version 1
Status In translation
Reset to Custom Defaults (RTD)
iDRAC firmware supports following Reset to Defaults (RTD) option to reset iDRAC settings to factory defaults:
● Reset iDRAC to factory defaults but preserve current users and network settings
● Reset iDRAC to factory defaults including user and network settings
● Reset iDRAC to factory defaults except set user name and password to 'root' and 'calvin'
You can use Reset to Custom Defaults feature to upload a custom config file and RTD to the settings. The new settings are applied on top
of preserving users and network settings.
Reset to Custom Defaults feature has following options:
● Upload Custom Default Settings —
○ You can upload custom defaults settings file. This file can be obtained by exporting config XML. The contents of the file can be
modified by customer to add or delete the settings.
○ You can upload XML file using iDRAC GUI, RACADM, or Redfish.
○ The uploaded configurations are saved in the default database.
● Save current settings as custom defaults —
○ This operation saves the current settings as default settings.
● Download custom default settings —
○ You can download config.XML for all the default settings.
● Initiate reset to custom defaults —
○ The uploaded/saved default settings are applied.
Identifier
GUID-D6DB6C7F-6989-4BFB-9B22-306B2E9E6E0C
Version 2
Status In translation
Resetting iDRAC using iDRAC web interface
To reset iDRAC, do one of the following in the iDRAC Web interface:
● Upload Custom Defaults file:
○ Go to ［Configuration］ > ［Server Configuration Profile］ > ［Custom Defaults］ > ［Upload Custom Defaults］
○ Upload the customized CustomConfigured.xml file from Local Share path
○ Click Apply. New Upload Custom Defaults Job is created.
● Reset to Custom Defaults:
○ When Upload Custom Defaults job is successful, go to ［Maintainance］ > ［Diagnostics］, click ［Reset iDRAC to Factory
Defalts］ option.
○ Select Discard all settings and set to Custom default configuration.
○ Click Continue to initiate Reset to customs Defaults configuration.
iDRAC を使用した管理下システムのトラブルシューティング 379