CLI Guide

Table Of Contents
ifconfig
Table 66. Details of ifconfig
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Execute Diagnostic Commands permission.
Synopsis
racadm ifconfig
Input N/A
Table 67. Example
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:192.168.0.0 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2550665 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9 MiB) TX bytes:0 (0.0 B)
infinibandstatistics
Table 68. Details of infinibandstatistics
Description Displays the list of InfiniBand devices managed by the server for which statistics are available.
Synopsis
racadm infinibandstatistics <Infiniband FQDD>
Input
<Infiniband FQDD> The fully qualified device descriptor of the device.
NOTE: Partition Driver State and Partition OS Driver State properties are the same
for infinibandstatistics.
Example
Display the statistics of all InfiniBand devices managed by the server.
racadm infinibandstatistics
Display the statistics of the InfiniBand specified by InfiniBand.Slot.3-1.
racadm infinibandstatistics InfiniBand.Slot.3-1
Device Description: InfiniBand in Slot 3 Port
1 Partition 1
Port Transmit Data: 0
Port Receive Data: 0
Port Transmit Packets: 0
Port Receive Packets: 0
Port Transmit Wait: 0
Port Transmit Discard: 0
Symbol Error Count: 0
Link Error Recovery Count: 0
Link Downed Count: 0
Port Receive Errors: 0
Port Receive Remote Physical Errors: 0
Port Receive Switch Relay Errors: 0
Local Link Integrity Errors: 0
Excessive Buffer Overrun: 0
VL15 Dropped: 0
Total Bytes Received: Not Applicable
Total Bytes Transmitted: Not Applicable
RACADM Subcommand Details 91