Administrator Guide

Table Of Contents
Table 30. Details of gethostnetworkinterfaces (continued)
IPv6 Address : fe80::7c5f:a114:84d4:17f6
Prefix Length : 64
IPv4 Gateway Address : 10.94.225.129
IPv4 DNSServer Address 0: 10.116.2.250
IPv4 DNSServer Address 1: 10.116.2.251
getled
Table 31. Details of getled
Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty slots).
To run this subcommand, you must have the Login User privilege.
Synopsis
racadm getled
Input
Output
LED is blinking
LED is not-blinking
Example
racadm getled
LED State : Blinking
racadm getled
LED State : Not-Blinking
getniccfg
Table 32. Details of getniccfg
Description
Displays the current and static NIC settings for iDRAC.
Synopsis
racadm getniccfg
Input
Output
The getniccfg subcommand displays an appropriate error message if the operation is not successful.
Otherwise, the output is displayed in the following format:
Table 33. Details of IPV4 settings
IPv4 settings:
NIC Enabled =1
IPv4 Enabled =1
DHCP Enabled =0
IP Address =10.94.227.207
Subnet Mask =255.255.255.0
Gateway =10.94.227.1
IPv6 settings:
IPv6 Enabled =Disabled
DHCP6 Enabled =Enabled
RACADM Subcommand Details 51