Users Guide
Table Of Contents
- Lifecycle Controller ユーザーズガイド
- はじめに
- Lifecycle Controller の使用
- オペレーティングシステムの導入
- 監視
- ファームウェアアップデート
- Configure
- 保守
- 使いやすいシステムコンポーネント名
- セットアップユーティリティとブートマネージャの使用
- トラブルシューティングとよくあるお問い合わせ(FAQ)
メモ: Lifecycle Controller では、ファイル名とファイル拡張子を含むパスに 256 文字を使用できます。たとえば、ファイル名と
拡張子に 56 文字が使用されている場合、パスには 200 文字までしか使用できません。Lifecycle Controller では、:、*、?、”、<、
>、|、#、%、^、およびスペースは使用できません。
部品交換後のハードウェアインベントリの表示またはエク
スポート
部品交換後にハードウェアインベントリを表示またはエクスポートするには、次の手順を行います。
1. Lifecycle Controller を起動します。詳細については、「Lifecycle Controller の起動」を参照してください。
2. 左ペインで、[Hardware Configuration](ハードウェア設定)をクリックします。
3. 右ペインで、[Hardware Inventory](ハードウェアインベントリ)をクリックします。
4. [現在のインベントリの表示] をクリックします。
Lifecycle Controller が古いハードウェアインベントリを表示します。
5. サーバーを再起動して、Lifecycle Controller を再起動します。
6. [ハードウェアインベントリ] ページで [現在のハードウェアインベントリの表示] をして最新のインベントリを表示する、
または [現在のインベントリのエクスポート] をクリックして最新のインベントリを外部の場所にエクスポートします。
Lifecycle Controller リセット後の現在のインベントリの
表示またはエクスポート
メモ: [システムの再利用または廃棄] オプションを選択すると、システムの電源が自動的に切れます。
Lifecycle Controller のリセット後に現在のハードウェアインベントリデータを表示、またはエクスポートするには、次の手順を実行
します。
1. システムに電源を投入して、iDRAC が機能し始めるまで数分待ちます。
2. POST 中に [<F10>] を押して Lifecycle Controller を起動すると、Collect System Inventory On Restart(CSIOR)がデフォルトで
有効になっているため、システムインベントリが収集されます。
3. Lifecycle Controller の起動後、[Hardware Configuration(ハードウェア設定)] > [View Current Hardware Inventory(現在のハー
ドウェアインベントリの表示)]、または [Export Current Hardware Inventory(現在のハードウェアインベントリのエクスポー
ト)] をクリックして、現在のハードウェアインベントリを表示、またはエクスポートします。次のメッセージが表示される場
合は、[No(いいえ)] をクリックしてシステム再起動し、再試行してください。
Hardware change is detected on the system. The current hardware inventory does not contain
the latest updates as the hardware inventory update is in progress. To view or export the
latest hardware inventory, relaunch Lifecycle Controller and retry. Do you want to continue
with the old current hardware inventory information?
Lifecycle Controller log
Lifecycle Controller Log provides a record of past activities on a managed system. Using the Lifecycle Log wizard, you can view and
export life cycle log, and add a work note to a log history. The log contains the following:
● Firmware update history based on device, version, and date and time.
● Events based on category, severity, and date and time.
● User comments history based on date and time.
NOTE: If you initiate configuration jobs using RACADM CLI or iDRAC web interface, the Lifecycle log displays information about the
user, interface used, and the IP address of the system from which you initiate the job.
Lifecycle ログ履歴の表示
[Lifecycle ログ]機能を使って、次の情報を表示します。
26 監視