Users Guide
Table Of Contents
- Guide de l’utilisateur de Dell Lifecycle Controller
- Table des matières
- Introduction
- Avantages de l’utilisation de l’outil Lifecycle Controller
- Avantages de l'utilisation d'iDRAC avec Lifecycle Controller
- New in this release
- Principales fonctionnalités
- Fonctionnalités sous licence du Lifecycle Controller
- Affichage des informations de licence iDRAC
- Autres documents utiles
- Accès aux documents à partir du site de support Dell
- Contacter Dell
- Utilisation du Lifecycle Controller
- Démarrage du Lifecycle Controller
- Première utilisation de Lifecycle Controller
- Configuration du Lifecycle Controller à l'aide de l'Assistant Configuration initiale
- Spécification de la langue et du type de clavier
- Affichage de la présentation du produit
- Configuration des paramètres réseau de Lifecycle Controller
- Configuration du réseau et des références iDRAC
- Caractères recommandés pour les noms d'utilisateur et mots de passe
- Affichage du résumé des paramètres réseau
- Accès à l’aide
- Affichage des notes de mise à jour
- Configuration de Lifecycle Controller à partir de la page d'accueil
- Configuration du Lifecycle Controller à l'aide de l'Assistant Configuration initiale
- Fonctions du Lifecycle Controller
- Operating system deployment
- Installing an operating system
- Utilisation de la configuration RAID optionnelle
- Configuration de RAID à l'aide de l'assistant de déploiement du système d'exploitation
- Installation automatique
- Démarrage sécurisé UEFI
- Accès aux pilotes
- Installation d'un système d'exploitation sur un LUN iSCSI et un LUN FCoE
- Scénarios post-redémarrage
- Surveillance
- Affichage et exportation de l'inventaire matériel
- About view and export current inventory
- À propos d'afficher/exporter l'inventaire installé en usine
- Affichage de l'inventaire matériel (actuel ou installé en usine)
- Exportation de l'inventaire matériel (actuel ou installé en usine)
- Affichage ou exportation de l'inventaire matériel après le remplacement d'une pièce
- Affichage ou exportation de l'inventaire actuel après réinitialisation du Lifecycle Controller
- Journal Lifecycle Controller
- mise à jour de firmware
- Configuration
- Options d'accès au panneau de configuration du système
- Configuration de l'iDRAC
- Configuration de la date et de l'heure système
- Configuration du RAID
- Configuration de RAID à l’aide de RAID logiciel
- Création d'un disque virtuel sécurisé sur un contrôleur RAID
- Key encryption
- Mode de cryptage par clé locale
- Briser les lecteurs en miroir
- System setup — Advanced Hardware Configuration
- Collecte de l'inventaire système au redémarrage
- Configuration d'un lecteur USB local
- Configuration des serveurs NFS et CIFS
- Conditions while configuring HTTP or HTTPS server
- Maintenance
- Noms conviviaux des composants du système
- Utilisation de la configuration du système et du Gestionnaire d'amorçage
- Choix du mode d’amorçage du système
- Accès au programme de configuration du système
- Réponse aux messages d'erreur
- Utilisation des touches de navigation de la configuration du système
- Options du programme de configuration du système
- Écran System Setup Main (Menu principal de la configuration du système)
- Écran System BIOS (BIOS du système)
- Écran Informations sur le système
- Écran Memory Settings (Paramètres de la mémoire)
- Écran Paramètres du processeur
- Écran Paramètres SATA
- Écran Boot Settings (Paramètres d’amorçage)
- Écran Périphériques intégrés
- Écran Communications série
- Écran Paramètres du profil du système
- System security screen
- Paramètres divers
- Fonctionnalités de mot de passe du système et de configuration
- Accès au UEFI Boot Manager (Gestionnaire d'amorçage UEFI)
- Gestion des systèmes intégrés
- Utilitaire de configuration d'iDRAC
- Dépannage et questions fréquemment posées
Operating system deployment
The OS Deployment feature allows you to deploy standard and custom operating systems on the managed system. You can also
configure RAID before installing the operating system if it is not already configured.
Lifecycle Controller allows deploying the operating system using the following options:
● Manual installation
● Unattended installation. For more information on unattended installation, see Unattended installation
● UEFI Secure Boot. For more information on UEFI Secure Boot, see UEFI Secure Boot
NOTE: Driver packs are available for the deployment of Windows and Linux operating systems supported by Lifecycle Controller.
Before deploying these operating systems, make sure that Lifecycle Controller is updated with the latest driver packs. You can
download the latest drivers pack from https://www.dell.com/support.
NOTE: When drivers are mounted from driver pack using iDRAC/RACDM/WSMAN or other interfaces, you can not launch LC UI or
it may not be available.
NOTE: FAT32 limits the size of a single file to 4 GB. If you are using a Windows image file that is more than 4 GB, split the file in to
multiple files. For more information see the documentation available at Docs.microsoft.com.
NOTE: UEFI environment doesn't support NTFS file format. USB Boot Media must be MBR disk with FAT32 filesystem.
Topics:
• Installing an operating system
• Utilisation de la configuration RAID optionnelle
• Configuration de RAID à l'aide de l'assistant de déploiement du système d'exploitation
• Installation automatique
• Démarrage sécurisé UEFI
• Accès aux pilotes
• Installation d'un système d'exploitation sur un LUN iSCSI et un LUN FCoE
• Scénarios post-redémarrage
Installing an operating system
Before installing an operating system, make sure that the following prerequisites are met:
● Optical DVD drive, virtual media, RFS, or a bootable USB drive is connected to a server.
● Software RAID or PowerEdge RAID controller is installed with the latest firmware, and at least two hard-disk drives are available
for creating the virtual disk. For information about the supported controllers and related firmware, see the operating system
documentation.
NOTE:
You can install the operating system on media such as Dual SD or PCIe SSD. However, RAID configuration is not
supported on these media. This option is not available on servers with iDRAC 5.00.00.00 and above.
● For installing an operating system in an unattended mode, make sure that you copy the required configuration file (autounattend.xml
for Windows and ks.cfg for RHEL 7) to a USB or network share.
● Ensure the Lifecycle Controller Operating System Driver pack is installed.
To install an operating system:
1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
2. In the left pane, click OS Deployment.
3. In the right pane, click Deploy OS and select one of the following:
● Configure RAID First — Click to configure a RAID connected to the server. For information about configuring a RAID, see Using
the optional RAID Configuration .
NOTE: Configuring RAID is optional if an already-connected virtual disk is present.
3
18 Operating system deployment