Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 用户指南
- 目录
- iDRAC 概览
- 登录 iDRAC
- 强制更改密码 (FCP)
- 使用 OpenID Connect 登录 iDRAC
- Logging in to iDRAC as local user, Active Directory user, or LDAP user
- 使用智能卡作为本地用户登录 iDRAC
- 使用单一登录登录 iDRAC
- 使用远程 RACADM 访问 iDRAC
- 使用本地 RACADM 访问 iDRAC
- 使用固件 RACADM 访问 iDRAC
- 简单的双重身份验证(简单 2FA)
- RSA SecurID 2FA
- 查看系统运行状况
- 使用公共密钥验证登录 iDRAC
- 多个 iDRAC 会话
- 安全默认密码
- 更改默认登录密码
- 启用或禁用默认密码警告消息
- 密码强度策略
- IP 阻止
- 使用 Web 界面启用或禁用 OS 到 iDRAC 直通
- 使用 RACADM 启用或禁用警报
- 设置受管系统
- 设置 iDRAC IP 地址
- 修改本地管理员帐户设置
- 设置受管系统位置
- 优化系统性能和功耗
- 设置管理站
- 配置支持的 Web 浏览器
- Updating device firmware
- 查看和管理分阶段更新
- 回滚设备固件
- 轻松还原
- 使用其他系统管理工具监测 iDRAC
- 支持服务器配置配置文件 — 导入和导出
- BIOS 设置或 F2 中的安全引导配置
- BIOS 恢复
- Plugin Management
- 配置 iDRAC
- 使用 OAuth 2.0 的委派授权
- 查看 iDRAC 和受管系统信息
- 设置 iDRAC 通信
- 配置用户帐户和权限
- 系统配置锁定模式
- 配置 iDRAC 以进行单一登录或智能卡登录
- 配置 iDRAC 以发送警报
- iDRAC 9 Group Manager
- 管理日志
- 在 iDRAC 中监测和管理电源
- iDRAC Direct Updates
- 对网络设备执行资源清册、监测和配置操作
- Managing storage devices
- BIOS 设置
- 配置并使用虚拟控制台
- 使用 iDRAC 服务模块
- 使用 USB 端口进行服务器管理
- 使用 Quick Sync 2
- 管理虚拟介质
- 管理 vFlash SD 卡
- 使用 SMCLP
- 部署操作系统
- 使用 iDRAC 排除受管系统故障
- iDRAC 中的 SupportAssist 集成
- 常见问题
- 使用案例场景
使用 CMC Web 界面设置 iDRAC IP
要使用 Chassis Management Controller (CMC) Web 界面设置 iDRAC IP 地址:
注: 必须具有机箱配置管理员权限才能从 CMC 设置 iDRAC 网络设置。CMC 选项仅适用于刀片服务器。
1. 登录 CMC Web 界面。
2. 转至 iDRAC 设置设置 CMC。
随即会显示部署 iDRAC 页面。
3. 在 iDRAC 网络设置中,根据要求选择启用 LAN 以及其他网络参数。有关更多信息,请参阅 CMC online help(CMC 联机帮
助)。
4. 有关特定于各刀片服务器的附加网络设置,请转至服务器概述<server name>。
随即会显示服务器状态页面。
5. 单击启动 iDRAC 并转至 iDRAC 设置连接性网络。
6. 在网络页面中,指定下列设置:
● 网络设置
● 常见设置
● IPv4 设置
● IPv6 设置
● IPMI 设置
● VLAN 设置
● 高级网络设置
注: 有关更多信息,请参阅 iDRAC Online Help(iDRAC 联机帮助)。
7. 要保存网络信息,请单击应用。
有关更多信息,请参阅 机箱管理控制器用户指南
,网址:
https://www.dell.com/cmcmanuals。
Auto-discovery
The Auto-discovery feature allows newly installed servers to automatically discover the remote management console that hosts the
provisioning server. The provisioning server provides custom administrative user credentials to iDRAC so that the unprovisioned server can
be discovered and managed from the management console. For more information about provisioning server, see the
生命周期控制器远程
服务快速入门指南,网址:
https://www.dell.com/idracmanuals.
Provisioning server works with a static IP address. Auto-discovery feature on the iDRAC is used to find the provisioning server using
DHCP/Unicast DNS/mDNS.
● When iDRAC has the console address, it sends its own service tag, IP address, Redfish port number, Web certificate etc.
● This information is periodically published to consoles.
DHCP, DNS server, or the default DNS host name discovers the provisioning server. If DNS is specified, the provisioning server IP is
retrieved from DNS and the DHCP settings are not required. If the provisioning server is specified, discovery is skipped so neither DHCP
nor DNS is required.
Auto-discovery can be enabled using the following ways:
1. Using iDRAC GUI: iDRAC Settings > Connectivity > iDRAC Auto Discover
设置受管系统 49