CLI Guide

Table 78. Details of ping6 (continued)
To run this subcommand, you must have Debug privilege.
Synopsis
racadm ping6 <ipv6address>
Input <ipv6address> — the IPv6 address of the remote endpoint to ping.
Example
Pinging 2011:de11:bdc:194::31 from 2011:de11:bdc:194::101 with 32 bytes
of data:
Reply from 2011:de11:bdc:194::31: time<1ms
Reply from 2011:de11:bdc:194::31: time<1ms
Reply from 2011:de11:bdc:194::31: time<1ms
Reply from 2011:de11:bdc:194::31: time<1ms
Ping statistics for 2011:de11:bdc:194::31:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
racadm proxy
Table 79. Details of RACADM Proxy
Description
On the PowerEdge FX2/FX2s systems, you can manage the compute sleds and CMC using
the iDRAC’s RACADM Proxy feature that redirects commands from iDRAC to CMC. You
can return the CMC response to local or remote RACADM.to access the CMC configuration and reporting
features without placing the CMC on the management network. The CMC configuration commands are
supported through local proxy when local configuration is enabled on iDRAC.
NOTE: Local racadm and local racadm proxy runs with root user privilege.
Synopsis
Local RACADM proxy usage
racadm <CMC racadm subcommand> --proxy
Remote RACADM proxy usage
racadm <CMC racadm subcommand> -u <username> -p <password> -r <idrac-ip
connected to cmc> --proxy
NOTE:
● The attribute racadm getconfig -g cfgractuning -o
cfgRacTuneChassisMgmtAtServer must be set as non-zero in CMC.
● The attribute racadm get system.ChassisControl.ChassisManagementMonitoring
attribute must be enabled in iDRAC.
● --proxy must be entered at the end of the command.
● The root privilege is the default privilege for Local RACADM proxy.
● The user privilege in the Remote RACADM proxy for CMC maps to iDRAC privilege.
Table 80. Details of CMC and iDRAC privilege for an operation
Required CMC Privilege for an operation
Required iDRAC Privilege for proxy
operation
CMC Login User Login
Chassis Configuration Administrator Configure
106 RACADM Subcommand Details