CLI Guide

Table 101. Details of storage (continued)
● To get the properties of a controller, run the following command:
racadm storage get controllers:<Controller FQDD>
NOTE: HBA, BOSS and PERC controllers connected through slimline cable will have FQDDs starting
with SL. Example - NonRaid.SL.5-1, AHCI.SL.5-1, RAID.SL.5-1 and so on.
● To generate and view information about the inventory of batteries, run the following command:
racadm storage get batteries -o
racadm storage get batteries --refkey <Controller FQDDs separated by
comma>
racadm storage get batteries --refkey <Controller FQDDs separated by
comma> -o
racadm storage get batteries --refkey <Controller FQDDs separated by
comma> -o -p <property names separated by comma>
● To generate and view information about the inventory of virtual disks, run the following command:
racadm storage get vdisks
racadm storage get vdisks --refkey <Controller FQDDs separated by
comma>
racadm storage get vdisks --refkey <Controller FQDDs separated by
comma> -o
racadm storage get vdisks --refkey <Controller FQDDs separated by
comma> -o -p <property names separated by comma>
● To generate and view information about the inventory of enclosures, run the following command:
racadm storage get enclosures -o
racadm storage get enclosures --refkey <Connector FQDDs separated by
comma>
racadm storage get enclosures --refkey <Connector FQDDs separated by
comma> -o -p <property names separated by comma>
● To get the list of enclosures, run the following command:
racadm storage get enclosures
● To get the properties of an enclosure, run the following command:
racadm storage get enclosures:<Enclosure FQDD>
RACADM Subcommand Details
125