CLI Guide

Table 101. Details of storage (continued)
● To unlock foreign configuration:
racadm storage unlock:<Controller FQDD> -key <Key id> -passwd
<passphrase>
● To start or stop a blink or identify operation on the specified storage device, run the following
command:
racadm storage blink:<FQDD>
racadm storage blink:<PCIeSSD FQDD>
racadm storage unblink:<FQDD>
racadm storage unblink:<PCIeSSD FQDD>
NOTE:
○ The start or stop a blink feature is not supported for HHHL PCIe SSD devices.
○ BOSS-S2 controllers support blink and unblink feature on M.2 drives.
● To force a physical disk online, offline
racadm storage forceonline:<PD FQDD>
racadm storage forceoffline:<PD FQDD>
NOTE:
Forcing a physical drive offline or online may result in loss of data. For more information, see
the latest PERC User's Guide.
● To prepare the PCIeSSD drive for removal:
racadm storage preparetoremove <PCIeSSD FQDD>
NOTE: The Prepare to Remove task is not supported for HHHL PCIe SSD devices.
● To perform a cryptographic erase operation on PCIeSSD device, run the following command:
racadm storage cryptographicerase:<PCIeSSD FQDD>
● To set the encryption mode to Secure Enterprise Key Manager (SEKM) for the PERC controller:
racadm storage setencryptionmode:<Controller FQDD> -mode <KEY
Management Mode>
NOTE: You need to enable SEKM on iDRAC before enabling SEKM on the PERC controller.
● To request iDRAC to rekey all devices:
racadm storage rekey:<Controller FQDD>
Input
● -o—Specifies the optimized version.
● -p—Specifies the property name.
Example
Inventory
● To view the help details for get command, run the following command:
racadm>>storage help get
racadm storage help get
Storage monitoring and inventory of hardware RAID connected to the system.
Usage :
racadm storage get status
RACADM Subcommand Details
131