CLI Guide

RollupStatus = Ok
Name = PERC H740P Adapter (PCI Slot 4)
PciSlot = 4
FirmwareVersion = 50.5.1-1733
RebuildRate = 30
BgiRate = 30
CheckConsistencyRate = 30
ReconstructRate = 30
PatrolReadRate = 30
PatrolReadMode = Automatic
PatrolReadState = Stopped
CheckConsistencyMode = Normal
LoadBalanceSetting = Auto
CopybackMode = ON
PreservedCache = Not Present
CacheMemorySize = 8192 MB
PersistHotspare = Disabled
KeyID = null
SpindownUnconfiguredDrives = Disabled
SpindownHotspare = Disabled
Timeintervalforspindown = 30 (Minutes)
SecurityStatus = Security Key Assigned
EncryptionMode = Security Enterprise Key Manager
SasAddress = 0x5D09466073045100
PciDeviceId = 0x16
PciSubdeviceId = 0x1fcb
PciVendorId = 0x1000
PciSubvendorId = 0x1028
PciBus = 0x0
PciDevice = 0x0
PciFunction = 0x0
BusWidth = Other
SlotLength = Other
SlotType = Other
MaxCapableSpeed = 12.0 Gb/s
LearnMode = Not supported
T10PICapability = Not Capable
SupportRAID10UnevenSpans = Supported
SupportEnhancedAutoForeignImport = Supported
EnhancedAutoImportForeignConfig = Disabled
SupportControllerBootMode = Supported
ControllerBootMode = Continue Boot On Error
RealtimeConfigurationCapability = Capable
RaidMode = None
SharedSlotAssignmentAllowed = Not Applicable
bootVD = Disk.Virtual.0:RAID.Slot.4-1
CurrentControllerMode = RAID
SupportEnhancedHBA = Supported
The following command displays the filtered property values for all returned controller objects:
storage get controllers -o -p Name
RAID.Slot.2-1
Name = PERC H345 Adapter (PCI Slot 2)
The following examples show the pending operation when used with storage get <object> commands:
To list storage objects without displaying the properties:
- This operation displays vdisk, which has pending operation:
racadm storage get vdisks -pending
DISK.Virtual.267386880:RAID.Slot.5-1
- This operation displays controllers, which have pending operations:
racadm storage get controllers -pending
RAID.Integrated.1-1
RACADM Subcommand Details
133