CLI Guide

Table 103. Details of swinventory (continued)
ComponentType = FIRMWARE
ElementName = Broadcom Adv. Dual 10GBASE-T Ethernet - 00:0A:F7:E8:4A:C8
FQDD = NIC.Integrated.1-1-1
InstallationDate = NA
Available Version = 20.08.04.03
HashValue =
f4d291569d9b81ccbf3f9b07e3abf5e6ac0d886ca88a9ada770c882114c0e820
-------------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Broadcom Adv. Dual 10GBASE-T Ethernet - 00:0A:F7:E8:4A:C8
FQDD = NIC.Integrated.1-1-1
InstallationDate = 2018-08-25T14:27:34Z
Current Version = 20.08.04.03
HashValue =
f4d291569d9b81ccbf3f9b07e3abf5e6ac0d886ca88a9ada770c882114c0e820
-------------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Broadcom Adv. Dual 10GBASE-T Ethernet - 00:0A:F7:E8:4A:C9
FQDD = NIC.Integrated.1-2-1
InstallationDate = NA
Available Version = 20.08.04.03
HashValue =
f4d291569d9b81ccbf3f9b07e3abf5e6ac0d886ca88a9ada770c882114c0e820
-------------------------------------------------------------------
NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly in
the inventory until you perform a server restart.
switchconnection
Table 104. Details of switchconnection
Description
Provides the switch port details of iDRAC and server network ports. Refresh switch port details of all ports
in the server. To run this command, you must have the Login privilege.
Synopsis
● racadm switchconnection view
●
racadm switchconnection view [iDRAC FQDD | NIC FQDD]
● racadm switchconnection refresh
Input
● <iDRAC FQDD | NIC FQDD> — is the fully qualified device descriptor of iDRAC or NIC.
Examples
● To provide switch port details of all iDRAC and server network port
racadm switchconnection view
● To provide switch port details of requested FQDD NIC.Integrated.1-1-1:BRCM
racadm switchconnection view NIC.Integrated.1-1-1:BRCM
● To refresh switch port details of all ports in the server
racadm switchconnection refresh
150 RACADM Subcommand Details