CLI Guide

Average Readings
Last Hour = 0%
Last Day = 0%
Last Week = 0%
Peak Readings
Last Week 0% [At Mon, 05 May 2017 15:58:35]
● To reset the peak utilization of a specific sensor
racadm systemperfstatistics PeakReset iDRAC.Embedded.1#SystemBoardCPUUsageStat
RAC1163: The peak utilization value of Out-Of-Band performance monitoring sensor CPU
Usage is successfully reset.
techsupreport
Table 107. Details of techsupreport subcommand
Description Allows you to perform the technical support report operations.
Tech Support Report (TSR) is now known as SupportAssist Collections and the new term is used in all
documentation and GUI. To maintain compatibility across server generations, the RACADM command has
been retained as techsupreport.
The types of operations are:
● collect—Collects the technical support report data to export. You can specify the various types of
logs to be in the report.
This operation generates a Job ID. Use this Job ID to check the status of the collect operation. To run
this operation, you must have the Server Control Commands permission.
● export—Exports the collected Tech Support Report data. To run this subcommand, you must have
the Execute Server Control Commands permission.
● getupdatetime—Gets the timestamp of the last operating system application data collection.
● updateosapp—Updates the operating system application data collection. To run this subcommand,
you must have the Execute Server Control Commands permission.
Synopsis
● To perform the technical support report operation by specifying the type of operation.
racadm techsupreport <tech support report command type>
● To collect the report data.
racadm techsupreport collect [-t <type of logs>]
● To export the collected report data.
racadm techsupreport export -l <CIFS,NFS,TFTP,FTP> -u <username> -p
<password>
● To get the timestamp of the last operating system application data collection.
racadm techsupreport getupdatetime
● To update the operating system application data collection.
racadm techsupreport updateosapp -t <type of OS App logs>
● To export the collected report data to local share.
racadm techsupreport export -f <filename>
RACADM Subcommand Details 153