CLI Guide

Table 107. Details of techsupreport subcommand (continued)
Input
● -t—type of logs. You can specify any of the following values that are separated by a ‘,’ (comma)
○ SysInfo—System Information
○ OSAppNoPII—Filtered OS and Application data
○ OSAppAll—OS and Application data
○ TTYLog—TTYLog data
NOTE:
○ For updating the operating system application data collection, enter the value OSAppNoPII or
OSAppAll to the -t option.
○ If no value is specified and system information data is collected.
○ To perform the OSLog collection, ensure that ISM is installed and running.
○ TTYLog includes PCIeSSD data.
● -l—network share location to export the report
● -u—user name for the remote share to export the report
● -p—password for the remote share to export the report
● -f—target filename for the exported log.
NOTE: The filename must have .zip as the extension.
Examples
● To collect the system information data.
racadm techsupreport collect —t <type of logs>
● To collect the system information and TTYLog data.
racadm techsupreport collect -t SysInfo,TTYLog
● To collect the operating system application data.
racadm techsupreport collect -t OSAppAll
● To export the collected Tech Support Report, to an FTP share
racadm techsupreport export -l ftp://192.168.0/share -u myuser -p xxx
● To export the collected Tech Support Report, to a TFTP share
racadm techsupreport export -l tftp://192.168.0/share
● To export the collected Tech Support Report, to a CIFS share.
racadm techsupreport export -l //192.168.0/share -u myuser -p xxx
● To export the collected Tech Support Report, to an NFS share.
racadm techsupreport export -l 192.168.0:/share
● To export the collected Tech Support Report to the local file system.
racadm techsupreport export -f tsr_report.zip
testalert
Table 108. Details of testalert
Description Tests FQDN supported SNMP trap notifications.
To run this subcommand, you must have the Test Alert User Access.
Synopsis
racadm testalert -i <index>
154 RACADM Subcommand Details