CLI Guide

Table 118. Details of vflashsd (continued)
Synopsis
● racadm vflashsd initialize
● racadm vflashsd status
Input
● Initialize— performs initialize operation on SD card.
● Status — indicates to view the progress or status report of the initialize operation.
Output
If initialization is in progress, the message Initialization of the vFlash SD Card is now in
progress is displayed. If unsuccessful, appropriate error message is displayed.
If the status of the last operation performed is successful, the message LastAction Progress
Status=============Initialize SD Card 100 % Complete is displayed. If unsuccessful,
appropriate error message is displayed.
vmdisconnect
Table 119. Details of vmdisconnect
Description Allows you to end another Virtual Media session. After the session ends, the web-based interface reflects
the correct connection status.
Enables an iDRAC user to disconnect all active Virtual Media sessions. The active Virtual Media sessions are
displayed on iDRAC web-based interface or by running the RACADM subcommands remoteimage or
getssninfo.
To run this subcommand, you must have the Access Virtual Media permission.
Synopsis
racadm vmdisconnect
164 RACADM Subcommand Details