CLI Guide

iDRAC Property Database Group and Object
Descriptions
The iDRAC property database contains the configuration information for iDRAC. Associated object is organizing data, and object
group is organizing object. The IDs for the groups and objects that the property database supports are listed in this section for
iDRAC Enterprise on Blade Servers and iDRAC Enterprise or Express on Rack and Tower Servers.
To configure iDRAC, use the group and object IDs with the RACADM subcommands.
NOTE: You can configure a setting that does not have a hash symbol (#) as the prefix in its output name. To modify a
configurable object, use the -o option.
NOTE: Racadm sets the value of objects without performing any functional validation on them. For example, RACADM
allows you to set the Certificate Validation object to 1 with the Active Directory object set to 0, even though Certificate
Validation can happen only if Active Directory is enabled. Similarly, the cfgADSSOEnable object can be set to 0 or 1 even
if the cfgADEnable object is 0, but it takes effect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where otherwise noted.
Topics:
• Displayable Characters
• idRacInfo
• cfgStaticLanNetworking
• cfgRemoteHosts
• cfgUserAdmin
• cfgEmailAlert
• cfgSessionManagement
• cfgSerial
• cfgOobSnmp
• cfgRacTuning
• ifcRacManagedNodeOs
• cfgRacVirtual
• cfgServerInfo
• cfgActiveDirectory
• cfgLDAP
• cfgLdapRoleGroup
• cfgStandardSchema
• cfgThermal
• cfgIpmiSol
• cfgIpmiLan
• cfgIpmiPetIpv6
• cfgIpmiPef
• cfgIpmiPet
• cfgUserDomain
• cfgServerPower
• cfgServerPowerSupply
• cfgIPv6LanNetworking
• cfgIpv6StaticLanNetworking
• cfgIPv6URL
• cfgIpmiSerial
• cfgSmartCard
• cfgNetTuning
4
iDRAC Property Database Group and Object Descriptions 165