CLI Guide

cfgNicStaticIPv4Enable (Read or Write)
Table 127. cfgNicStaticIPv4Enable
Description
Enables or disables the IPv4 stack.
Legal Values
● 0 — Disabled
● 1 — Enabled
Default
1 — Enabled
NOTE: If this object is modified, then the object cfgNicIPv4Enable is also modified.
cfgNicStaticIpAddress (Read or Write)
Table 128. cfgNicStaticIpAddress
Description
Returns or sets the current IPv4 address.
NOTE: Only set the current IPv4 address if cfgNicUseDhcp is set to 0(false).
Legal Values
Any Valid IPv4 address
Default
192.168.0
cfgNicStaticUseDhcp (Read or Write)
Table 129. cfgNicStaticUseDhcp
Description
Specifies whether DHCP is used to configure the IPv4 network.
Legal Values
● 0 — IP Address, subnet mask and gateway are configured on the device.
● 1 — IP Address, subnet mask and gateway are assigned from the DHCP server.
Default
0 — Do not use DHCP
NOTE: If this object is modified, then the object cfgNicUseDhcp is also modified.
cfgNicStaticNetmask (Read or Write)
Table 130. cfgNicStaticNetmask
Description
Returns or sets the static IPv4 Netmask.
NOTE: Only set the current IPv4 netmask, if cfgNicUseDhcp is set to 0 (false).
Legal Values
Any Valid IPv4 Netmask
Default
255.255.255.0
168 iDRAC Property Database Group and Object Descriptions