CLI Guide

Table 139. cfgRhostsFwUpdatePath (continued)
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
cfgRhostsSmtpServerIpAddr (Read or Write)
Table 140. Details of cfgRhostsSmtpServerIpAddr
Description
The IPv4 or IPv6 address of the network SMTP server.
The SMTP server transmits email alerts from iDRAC if the alerts are configured and enabled.
Legal Values
A string representing a valid SMTP server IPv4 or IPv6 address. For example: 192.168.0.2.
Default
For IPv4, it is 0.0.0.0
cfgRhostsSyslogEnable (Read or Write)
Table 141. Details of cfgRhostsSyslogEnable
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables
remote syslog.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Table 142. Details of cfgRhostsSyslogPort
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
Legal Values
10–65535
Default 514
cfgRhostsSyslogServer1 (Read or Write)
Table 143. Details of cfgRhostsSyslogServer1
Description
To store the RAC and SEL logs specify the first of three possible remote syslog servers. This property is
only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
iDRAC Property Database Group and Object Descriptions 171