CLI Guide

cfgVirtualBootOnce (Read or Write)
Table 198. Details of cfgVirtualBootOnce
Description
Enables or disables the Virtual Media Boot Once feature of iDRAC.
If this property is enabled when the host server is rebooted, this feature attempts to start from the virtual
media devices — if the appropriate media is installed in the device.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
cfgVirMediaFloppyEmulation (Read or Write)
Table 199. Details of cfgVirMediaFloppyEmulation
Description
When set to 0, the virtual floppy drive is recognized as a removable disk by Windows operating systems.
Windows operating systems assigns a drive letter that is C: or higher during enumeration. When set to 1,
the Virtual Floppy drive is seen as a floppy drive by Windows operating systems. Windows operating
systems assigns a drive letter of A: or B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this change to take
effect.
Legal Values
● 1 (TRUE)
● 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Table 200. Details of cfgSDWriteProtect
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from 12G iDRAC 1.0 release onwards. The functionality of this
command is covered by cfgVFlashSDWriteProtect. While execution of the
cfgSDWriteProtect command is successful, use the cfgVFlashSDWriteProtect command.
For more information, see cfgVFlashwriteProtect (Read Only).
Legal Values
● 1 (TRUE)
● 0(FALSE)
Default
0
cfgServerInfo
This group allows you to select the BIOS first boot device and provides the option to start the selected device only once.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the cfgServerInfo.
iDRAC Property Database Group and Object Descriptions
187