CLI Guide

Table 351. Details of cfgSmartCardLogonEnable (continued)
NOTE: Enabling with remote RACADM is only applicable for iDRAC on Rack and Tower Servers.
Legal Values
● 0 (Disabled)
● 1 (Enabled)
● 2 (Enabled with Remote RACADM) — It is not applicable for iDRAC Enterprise on Blade Servers.
Default
0
cfgSmartCardCRLEnable (Read or Write)
Table 352. Details of cfgSmartCardCRLEnable
Description
Enables or disables the Certificate Revocation List (CRL).
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade
Servers.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
cfgNetTuning
This group enables users to configure the advanced network interface parameters for the RAC NIC. When configured, the
updated settings may take up to a minute to become active.
NOTE: This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modification of the
properties in this group can result in your RAC NIC become inoperable.
The following sections provide information about the objects in the cfgNetTuning group.
cfgNetTuningNicAutoneg (Read or Write)
Table 353. Details of cfgNetTuningNicAutoneg
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over
other values set in this group.
Legal Values
● 0 = Auto Negotiation is Disabled
● 1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
iDRAC Property Database Group and Object Descriptions
225