CLI Guide

cfgVFlashSD
This group is used to configure the properties for the Virtual Flash SD card.
NOTE: If the vFlash card is present but is not enabled, the query for any property under this group displays:
ERROR: vFlash is not enabled.
To view the properties of this group, enable the vFlash using the command:
racadm config -g cfgvFlashSD -o cfgvFlashSDEnable 1
The following sections provide information about the objects in the cfgVFlashSD group.
cfgVFlashSDInitialized (Read Only)
Table 361. Details of cfgVFlashSDInitialized
Description
Displays whether an SD card is initialized.
Legal Values
● 0
● 1
Default
None
cfgVFlashSDEnable (Read or Write)
Table 362. Details of cfgVFlashSDEnable
Description
Enables or disables the vFlash SD card.
NOTE: Disabling vFlashPartition by setting cfgVFlashSDEnable to 0 does not require a
license.
Legal Values
● 0 (Disable)
● 1 (Enable)
Default
1
cfgVFlashSDSize (Read Only)
Table 363. Details of cfgVFlashSDSize
Description
Displays the size of the vFlash SD card in megabytes (MB).
Legal Values
A string of up to 64 characters.
Default
<card size>
cfgVFlashSDLicensed (Read Only)
Table 364. Details of cfgVFlashSDLicensed
Description
Displays whether an SD card or vFlash SD card is inserted. The vFlash SD card supports the new enhanced
vFlash features and the SD card supports only the limited vFlash features.
228 iDRAC Property Database Group and Object Descriptions