CLI Guide

clearasrscreen
Table 14. Details of the clearasrscreen attribute
Description
Clears the last crash (ASR) screen that is in memory.
For more information, see "Enabling Last Crash Screen" section in iDRAC User's Guide available at
https://www.dell.com/idracmanuals .
NOTE: To run this subcommand, you must have the Clear Logs permission.
Synopsis
racadm clearasrscreen
Input
None
Output
Clears the last crash screen buffer.
Example
racadm clearasrscreen
clearpending
Table 15. clearpending
Description Deletes the pending values of all the attributes (objects) in the device (NIC, BIOS, FC, and Storage).
NOTE: If any attribute is not modified or a job is already scheduled for the same device, then the
pending state is not cleared or deleted.
Synopsis
racadm clearpending <FQDD>
Input <FQDD> — The values are:
● BIOS FQDD
● NIC FQDD
● Infiniband FQDD
● FC FQDD
● Storage controller FQDD
Output A message is displayed indicating that the pending state is cleared or deleted.
Example
● To clear the pending state of NIC device
racadm clearpending NIC.Integrated.1-1
● To clear the pending state of InfiniBand device
racadm clearpending <InfiniBand FQDD>
closessn
Table 16. Details of closessn
Description Closes a communication session on the device. Use getssninfo to view a list of sessions that can be
closed using this command.
To run this subcommand, you must have the Administrator permission.
NOTE: This subcommand ends all the sessions other than the current session.
RACADM Subcommand Details 39