CLI Guide

Table 25. Details of fcstatistics (continued)
Input <FC fqdd> — Specify the FQDD of the target FC device.
Example
racadm fcstatistics <FC fqdd>
frontpanelerror
Table 26. Details of frontpanelerror
Description Enables or disables the live-feed of the errors currently being displayed on the LCD screen.
For error acknowledge use hide, and error assert use show.
Synopsis
racadm frontpanelerror show
racadm frontpanelerror hide
Input
● show — to view the errors currently being displayed on the LCD screen.
● hide — to hide the errors currently being displayed on the LCD screen.
Example
● racadm frontpanelerror show
Front Panel Error—Show Enabled.
●
racadm frontpanelerror hide
Front Panel Error—Hide Enabled.
fwupdate
Table 27. Details of fwupdate
Description
Allows you to update the firmware. You can:
● Check the firmware update process status.
● Update iDRAC firmware from FTP or TFTP server by providing an IP address and optional path.
● Update iDRAC firmware from the local file system using Local and Remote RACADM.
● Roll back to the standby firmware.
To use this subcommand, you must have Configure iDRAC permission.
NOTE: This command is only for iDRAC firmware update. For any other firmware update like BIOS or
DUPs, use Update subcommand.
NOTE: If the iSM is exposed on the host server, you may see the Firmware update operation
is already in progress error.
RACADM Subcommand Details 47