CLI Guide

Table 27. Details of fwupdate (continued)
● Query the current status of the firmware update process:
racadm fwupdate -s
● Rollback to the standby firmware:
racadm fwupdate -r
● Upload firmware image from TFTP server, start firmware update. After firmware update is complete,
delete previous iDRAC configuration:
racadm fwupdate -g -u -a 192.168.0.100 -d /tmp/images --clearcfg
NOTE: Firmware update from local RACADM (using -p -u -d options) is not supported on Linux
operating system.
The following table describes the firmware update method that is supported for each interface:
Table 28. Details of fwupdate methods
FW Update Method iDRAC on Blade Servers iDRAC on Rack and Tower Servers
Local RACADM Yes Yes
Local RACADM-TFTP Yes Yes
Local RACADM-FTP Yes Yes
Remote RACADM Yes Yes
Remote RACADM-TFTP Yes Yes
Remote RACADM-FTP Yes Yes
Firmware RACADM-TFTP Yes Yes
Firmware RACADM-FTP Yes Yes
gethostnetworkinterfaces
Table 29. Details of gethostnetworkinterfaces
Description Displays host network interface details.
NOTE: To run this subcommand, you must have iDRAC Service Module installed on the server
operating system.
Synopsis
racadm gethostnetworkinterfaces
racadm gethostnetworkinterfaces <NIC FQDD>
Examples
● To display the details of all the network interfaces on the server.
racadm gethostnetworkinterfaces
Local Area Connection 12
Description : iDRAC Virtual NIC USB Device #8
Status : Up
Interface Type : Ethernet
DHCP : Enabled
RACADM Subcommand Details 49