CLI Guide

Table 31. Details of getniccfg (continued)
Table 32. Details of IPV4 settings (continued)
Static Subnet Mask =255.255.255.0
Static Gateway =10.94.227.1
Static IPv6 settings:
Static IP Address 1 =::
Static Prefix Length =64
Static Gateway =::
NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC.
NOTE: IPv6 Address 1 field indicates static IP and IPv6 Address 2 field indicates dynamic IP.
NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is not displayed for
iDRAC Enterprise on Blade servers.
Example
● Display iDRAC network settings in server slot 1
racadm getniccfg
getraclog
Table 33. Details of getraclog
Description
The getraclog command displays RAC log entries.
Synopsis
● racadm getraclog [-i]
●
racadm getraclog [-s <start>] [-c <count>]
racadm getraclog [-c <count>] [-s <start-record>]
NOTE: If options are not provided, the entire log is displayed.
Input
● -c — Specifies the number of records to display.
NOTE: On Local RACADM, the number of logs are restricted to 100 by default.
● -s — Specifies the starting record used for the display.
NOTE: When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options are
not displayed.
Output
SeqNumber = 286
Message ID = USR0005
Category = Audit
AgentID = RACLOG
Severity = Information
Timestamp = 2017-05-15 06:25:27
Message = Login failed from processdisco06a: 192.168.0
Message Arg 1 = processdisco06a
Message Arg 2 = 10.92.68.245
FQDD = iDRAC.Embedded.1
52 RACADM Subcommand Details