CLI Guide

Table 69. Details of inlettemphistory (continued)
Last Month = 29C ( 84.2F ) [At Wed, 16 May 2017 15:34:13]
Last Year = 29C ( 84.2F ) [At Wed, 16 May 2017 15:34:13]
● Configure the proxy parameter.
racadm set lifecyclecontroller.lcattributes.UserProxyUsername admin1
● Remove the the proxy parameter.
racadm set lifecyclecontroller.lcattributes.UserProxyUsername
● View the list of proxy attributes.
racadm get lifecycleController.lcAttributes
jobqueue
Table 70. Details of jobqueue
Description Enables you to view and delete a job or jobs in the current Job Queue.
NOTE:
● To run this subcommand, you must have the Server control privilege.
● If an unexpected error message is displayed for any operation, ensure you delete
some jobs in the jobqueue and retry the operation.
● Use jobqueue create command after applying a pending device configuration. Else,
you may see a job creation and deletion in the lclog.
● Multi-object Set commands using XML, or JSON files do NOT require a jobqueue
create command; jobs will be automatically created by the Set command.
Synopsis
racadm jobqueue view -i<jobid>
racadm jobqueue delete [-i<jobid>][--all]
where valid options are -i and --all.
racadm jobqueue create <fqdd> [-r <reboot type> ] [-s <start
time> ] [-e <expiry time>]
racadm jobqueue create <fqdd> [-r <reboot type>] [-s <start
time>] [-e <expiration time>] [--realtime]
Input
● -i — Specifies a job ID that is displayed or deleted.
NOTE: The value JID_CLEARALL will force delete all the possible jobs in the queue.
● --all — The job IDs that are not applicable are deleted.
● -fqdd — Specifies an FQDD for which a job should be created.
● —r <reboot type> — Specifies a reboot type.
○ none — No Reboot Job. This option is the default value.
○ pwrcycle — Power cycle.
○ graceful — Graceful Reboot without forced shut down.
○ forced — Graceful Reboot with forced shut down.
●
start time — Specifies a start time for job scheduled in the yyyymmddhhmmss
format. TIME_NOW means immediate. Next Reboot means job is in scheduled state until
the next manual restart.
● expiry time — Specifies expiry time for the job execution in the yyyymmddhhmmss
format. The job must start by this time. TIME_NA means expiry time is not applicable.
94 RACADM Subcommand Details