CLI Guide

Table 71. details of krbkeytabupload (continued)
To run this subcommand, you must have the Server Control privilege.
Synopsis
racadm krbkeytabupload [-f <filename>]
<filename> is the name of the file including the path.
Input -f — Specifies the filename of the keytab uploaded. If the file is not specified, the keytab file in the
current directory is selected.
Output
When successful Kerberos Keytab successfully uploaded to the RAC message is displayed.
If unsuccessful, appropriate error message is displayed.
Example
racadm krbkeytabupload -f c:\keytab\krbkeytab.tab
lclog
Table 72. Details of lclog
Description Allows you to:
● Export the lifecycle log history. The log exports to remote or local share location.
● View the lifecycle log for a particular device or category
● Add comment to a record in lifecycle log
● Add a work note (an entry) in the lifecycle log
● View the status of a configuration job.
NOTE:
● When you run this command on Local RACADM, the data is available to RACADM as a USB partition
and may display a pop-up message.
● While Lifecycle Controller is running for racadm commands, you cannot perform other operation
which needs Lifecycle Controller Partition. If the Lifecycle Controller Partition is unreleased
(because of improper closure of racadm command in the partition), then you must wait 20-35
minutes to clear the Lifecycle Controller Partition
96 RACADM Subcommand Details